모두 아시다시피Microsoft 70-536-VB인증시험은 업계여서도 아주 큰 비중을 차지할만큼 큰 시험입니다. 하지만 문제는 어덯게 이 시험을 패스할것이냐이죠.Microsoft 70-536-VB인증시험패스하기는 너무 힘들기 때문입니다. 다른사이트에 있는 자료들도 솔직히 모두 정확성이 떨어지는건 사실입니다. 하지만 우리ITExamDump의 문제와 답은 IT인증시험준비중인 모든분들한테 필요한 자료를 제공할수 있습니디. 그리고 중요한건 우리의 문제와 답으로 여러분은 한번에 시험을 패스하실수 있습니다.
Microsoft인증 70-536-VB시험은 인기있는 IT자격증을 취득하는데 필요한 국제적으로 인정받는 시험과목입니다. Microsoft인증 70-536-VB시험을 패스하려면 ITExamDump의Microsoft인증 70-536-VB덤프로 시험준비공부를 하는게 제일 좋은 방법입니다. ITExamDump덤프는 IT전문가들이 최선을 다해 연구해낸 멋진 작품입니다. Microsoft인증 70-536-VB덤프구매후 업데이트될시 업데이트버전을 무료서비스료 제공해드립니다.
시험 번호/코드: 70-536-VB
시험 이름: Microsoft (TS:MS.NET Framework 2.0-Application Develop Foundation)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 173 문항
업데이트: 2014-03-27
어떻게Microsoft인증70-536-VB시험을 패스하느냐 에는 여러 가지 방법이 있습니다. 하지만 여러분의 선택에 따라 보장도 또한 틀립니다. 우리ITExamDump 에서는 아주 완벽한 학습가이드를 제공하며,Microsoft인증70-536-VB시험은 아주 간편하게 패스하실 수 있습니다. ITExamDump에서 제공되는 문제와 답은 모두 실제Microsoft인증70-536-VB시험에서나 오는 문제들입니다. 일종의 기출문제입니다.때문에 우리ITExamDump덤프의 보장 도와 정확도는 안심하셔도 좋습니다.무조건Microsoft인증70-536-VB시험을 통과하게 만듭니다.우리ITExamDump또한 끈임 없는 덤프갱신으로 페펙트한Microsoft인증70-536-VB시험자료를 여러분들한테 선사하겠습니다.
ITExamDump 에서 출시한Microsoft인증70-536-VB 덤프는Microsoft인증70-536-VB 실제시험의 출제범위와 출제유형을 대비하여 제작된 최신버전 덤프입니다. 시험문제가 바뀌면 제일 빠른 시일내에 덤프를 업데이트 하도록 최선을 다하고 있으며 1년 무료 업데이트서비스를 제공해드립니다. 1년 무료 업데이트서비스를 제공해드리기에 시험시간을 늦추어도 시험성적에 아무런 페를 끼치지 않습니다. ITExamDump에 믿음을 느낄수 있도록 구매사이트마다 무료샘플 다운가능기능을 설치하였습니다.무료샘플을 체험해보시고ITExamDump을 선택해주세요.
IT인증시험에 도전해보려는 분들은 회사에 다니는 분들이 대부분입니다. 승진을 위해서나 연봉협상을 위해서나 자격증 취득은 지금시대의 필수입니다. ITExamDump의Microsoft인증 70-536-VB덤프는 회사다니느라 바쁜 나날을 보내고 있는 분들을 위해 준비한 시험준비공부자료입니다. ITExamDump의Microsoft인증 70-536-VB덤프를 구매하여 pdf버전을 공부하고 소프트웨어버전으로 시험환경을 익혀 시험보는게 두렵지 않게 해드립니다. 문제가 적고 가격이 저렴해 누구나 부담없이 애용 가능합니다. ITExamDump의Microsoft인증 70-536-VB덤프를 데려가 주시면 기적을 안겨드릴게요.
70-536-VB 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-536-VB.html
NO.1 You are creating an undo buffer that stores data modifications.
You need to ensure that the undo functionality undoes the most recent data modifications first. You also
need to ensure that the undo buffer permits the storage of strings only.
Which code segment should you use?
A. Dim undoBuffer As New Stack(Of String)
B. Dim undoBuffer As New Stack()
C. Dim undoBuffer As New Queue(Of String)
D. Dim undoBuffer As New Queue()
Answer: A
Microsoft 70-536-VB기출문제 70-536-VB 70-536-VB인증 70-536-VB pdf 70-536-VB
NO.2 You are creating a class to compare a specially-formatted string. The default collation comparisons do
not apply.
You need to implement the IComparable(Of String) interface.
Which code segment should you use?
A. Public Class Person
Implements IComparable(Of String)
Public Function CompareTo(ByVal other As String) As _
Integer Implements IComparable(Of String).CompareTo
...
End Function
End Class
B. Public Class Person
Implements IComparable(Of String)
Public Function CompareTo(ByVal other As Object) As _
Integer Implements IComparable(Of String).CompareTo
...
End Function
End Class
C. Public Class Person
Implements IComparable(Of String)
Public Function CompareTo(ByVal other As String) _
As Boolean Implements IComparable(Of String).CompareTo
...
End Function
End Class
D. Public Class Person
Implements IComparable(Of String)
Public Function CompareTo(ByVal other As Object) _
As Boolean Implements IComparable(Of String).CompareTo
...
End Function
End Class
Answer: A
Microsoft 70-536-VB자격증 70-536-VB dump 70-536-VB 70-536-VB인증
NO.3 You are developing an application to perform mathematical calculations. You develop a class named
CalculationValues. You write a procedure named PerformCalculation that operates on an instance of the
class.
You need to ensure that the user interface of the application continues to respond while calculations are
being performed. You need to write a code segment that calls the PerformCalculation procedure to
achieve this goal.
Which code segment should you use?
A. Private Sub PerformCalculation()
...
End Sub
Private Sub DoWork()
Dim myValues As New CalculationValues()
Dim newThread As New Thread( _
New ThreadStart(AddressOf PerformCalculation))
newThread.Start(myValues)
End Sub
B. Private Sub PerformCalculation()
...
End Sub
Private Sub DoWork()
Dim myValues As New CalculationValues()
Dim delStart As New ThreadStart( _
AddressOf PerformCalculation)
Dim newThread As New Thread(delStart)
If newThread.IsAlive Then
newThread.Start(myValues)
End If
End Sub
C. Private Sub PerformCalculation ( _
ByVal values As CalculationValues)
...
End Sub
Private Sub DoWork()
Dim myValues As New CalculationValues()
Application.DoEvents()
PerformCalculation(myValues)
Application.DoEvents()
End Sub
D. Private Sub PerformCalculation ( _
ByVal values As Object)
...
End Sub
Private Sub DoWork()
Dim myValues As New CalculationValues()
Dim newThread As New Thread( _
New ParameterizedThreadStart( _
AddressOf PerformCalculation))
newThread.Start(myValues)
End Sub
Answer: D
Microsoft 70-536-VB 70-536-VB자료 70-536-VB
NO.4 You write the following code.
You need to create an event that will invoke FaxDocs.
Which code segment should you use?
A. Public Shared Event Fax As FaxDocs
B. Public Shared Event FaxDocs As FaxArgs
C. Public Class FaxArgs
Inherits EventArgs
Private coverPageInfo As String
Public Sub New(ByVal coverInfo As String)
Me.coverPageInfo = coverInfo
End Sub
Public ReadOnly Property CoverPageInformation As String
Get
Return Me.coverPageInfo
End Get
End Property
End Class
D. Public Class FaxArgs
Inherits EventArgs
Private coverPageInfo As String
Public ReadOnly Property CoverPageInformation As String
Get
Return Me.coverPageInfo
End Get
End Property
End Class
Answer: A
Microsoft 70-536-VB자료 70-536-VB자료 70-536-VB dumps
NO.5 You are developing an application that dynamically loads assemblies from an application directory.
You need to write a code segment that loads an assembly named Assembly1.dll into the current
application domain.
Which code segment should you use?
A. Dim domain As AppDomain = AppDomain.CurrentDomain
Dim myPath As String = _
Path.Combine(domain.BaseDirectory, "Assembly1.dll")
Dim asm As [Assembly] = [Assembly].LoadFrom(myPath)
B. Dim domain As AppDomain = AppDomain.CurrentDomain
Dim myPath As String = _
Path.Combine(domain.BaseDirectory, "Assembly1.dll")
Dim asm As [Assembly] = [Assembly].Load(myPath)
C. Dim domain As AppDomain = AppDomain.CurrentDomain
Dim myPath As String = _
Path.Combine(domain.DynamicDirectory, "Assembly1.dll")
Dim asm As [Assembly] = _
AppDomain.CurrentDomain.Load(myPath)
D. Dim domain As AppDomain = AppDomain.CurrentDomain
Dim asm As [Assembly] = domain.GetData("Assembly1.dll")
Answer: A
Microsoft인증 70-536-VB 70-536-VB 70-536-VB기출문제 70-536-VB dump
NO.6 You are creating an application that lists processes on remote computers. The application requires a
method that performs the following tasks:
Accept the remote computer name as a string parameter named strComputer.
Return an ArrayList object that contains the names of all processes that are running on that computer.
You need to write a code segment that retrieves the name of each process that is running on the remote
computer and adds the name to the ArrayList object.
Which code segment should you use?
A. Dim al As New ArrayList()
Dim procs As Process() = _
Process.GetProcessesByName(strComputer)
Dim proc As Process
For Each proc In procs
al.Add(proc)
Next
B. Dim al As New ArrayList()
Dim procs As Process() = Process.GetProcesses(strComputer)
Dim proc As Process
For Each proc In procs
al.Add(proc)
Next
C. Dim al As New ArrayList()
Dim procs As Process() = _
Process.GetProcessesByName(strComputer)
Dim proc As Process
For Each proc In procs
al.Add(proc.ProcessName)
Next
D. Dim al As New ArrayList()
Dim procs As Process() = Process.GetProcesses(strComputer)
Dim proc As Process
For Each proc In procs
al.Add(proc.ProcessName)
Next
Answer: D
Microsoft 70-536-VB자료 70-536-VB 70-536-VB덤프
NO.7 You are working on a debug build of an application.
You need to find the line of code that caused an exception to be thrown.
Which property of the Exception class should you use to achieve this goal?
A. Data
B. Message
C. StackTrace
D. Source
Answer: C
Microsoft 70-536-VB 70-536-VB 70-536-VB시험문제
NO.8 You need to write a code segment that will create a common language runtime (CLR) unit of isolation
within an application.
Which code segment should you use?
A. Dim mySetup As AppDomainSetup = _
AppDomain.CurrentDomain.SetupInformation
mySetup.ShadowCopyFiles = "true"
B. Dim myProcess As System.Diagnostics.Process
myProcess = New System.Diagnostics.Process()
C. Dim domain As AppDomain
domain = AppDomain.CreateDomain("MyDomain")
D. Dim myComponent As System.ComponentModel.Component
myComponent = New System.ComponentModel.Component()
Answer: C
Microsoft최신덤프 70-536-VB 70-536-VB dump 70-536-VB pdf 70-536-VB
NO.9 You develop a service application named FileService. You deploy the service application to multiple
servers on your network.
You implement the following code segment. (Line numbers are included for reference only.)
You need to develop a routine that will start FileService if it stops. The routine must start FileService on
the server identified by the serverName input parameter.
Which two lines of code should you add to the code segment? (Each correct answer presents part of the
solution. Choose two.)
A. Insert the following line of code between lines 03 and 04:
crtl.ServiceName = serverName
B. Insert the following line of code between lines 03 and 04:
crtl.MachineName = serverName
C. Insert the following line of code between lines 03 and 04:
crtl.Site.Name = serverName
D. Insert the following line of code between lines 04 and 05:
crtl.Continue()
E. Insert the following line of code between lines 04 and 05:
crtl.Start()
F. Insert the following line of code between lines 04 and 05:
crtl.ExecuteCommand(0)
Answer: BE
Microsoft시험문제 70-536-VB덤프 70-536-VB덤프 70-536-VB
NO.10 You create a class library that is used by applications in three departments of your company. The
library contains a Department class with the following definition.
You need to write a code segment that creates a Department object instance by using the field values
retrieved from the application configuration file.
Which code segment should you use?
A. Public Class deptElement
Inherits ConfigurationElement
Protected Overrides Sub DeserializeElement( _
ByVal reader As XmlReader, _
ByVal serializeCollectionKey As Boolean)
Dim dept As Department = New Department()
dept.name = ConfigurationManager.AppSettings("name")
dept.manager = _
ConfigurationManager.AppSettings("manager")
End Sub
End Class
B. Public Class deptElement
Inherits ConfigurationElement
Protected Overrides Sub DeserializeElement( _
ByVal reader As XmlReader, _
ByVal serializeCollectionKey As Boolean)
Dim dept As Department = New Department()
dept.name = reader.GetAttribute("name")
dept.manager = reader.GetAttribute("manager")
End Sub
End Class
C. Public Class deptHandler
Implements IConfigurationSectionHandler
Public Function Create(ByVal parent As Object, _
ByVal configContext As Object, _
ByVal section As System.Xml.XmlNode) As Object _
Implements IConfigurationSectionHandler.Create
Dim dept As Department = new Department()
dept.name = section.SelectSingleNode("name").InnerText
dept.manager = _
section.SelectSingleNode("manager").InnerText
Return dept
End Function
End Class
D. Public Class deptHandler
Implements IConfigurationSectionHandler
Public Function Create(ByVal parent As Object, _
ByVal configContext As Object, _
ByVal section As System.Xml.XmlNode) As Object _
Implements IConfigurationSectionHandler.Create
Dim dept As Department = new Department()
dept.name = section.Attributes("name").Value
dept.manager = section.Attributes("manager").Value
Return dept
End Function
End Class
Answer: C
Microsoft 70-536-VB dumps 70-536-VB자료
NO.11 You are writing a method that returns an ArrayList named al.
You need to ensure that changes to the ArrayList are performed in a thread-safe manner.
Which code segment should you use?
A. Dim al As ArrayList = New ArrayList()
SyncLock al.SyncRoot
Return al
End SyncLock
B. Dim al As ArrayList = New ArrayList()
SyncLock al.SyncRoot.GetType()
Return al
End SyncLock
C. Dim al As ArrayList = New ArrayList()
Monitor.Enter(al)
Monitor.Exit(al)
Return al
D. Dim al As ArrayList = New ArrayList()
Dim sync_al as ArrayList = ArrayList.Synchronized(al)
Return sync_al
Answer: D
Microsoft 70-536-VB 70-536-VB 70-536-VB덤프
NO.12 You need to create a method to clear a Queue named q.
Which code segment should you use?
A. Dim e As Object
For Each e In q
q.Dequeue()
Next
B. Dim e As Object
For Each e In q
q.Enqueue(Nothing)
Next
C. q.Clear()
D. q.Dequeue()
Answer: C
Microsoft기출문제 70-536-VB기출문제 70-536-VB
NO.13 You are writing a custom dictionary. The custom-dictionary class is named MyDictionary.
You need to ensure that the dictionary is type safe.
Which code segment should you use?
A. Class MyDictionary
Implements Dictionary(Of String, String)
B. Class MyDictionary
Inherits HashTable
C. Class MyDictionary
Implements IDictionary
D. Class MyDictionary
...
End Class
Dim t As New Dictionary(Of String, String)
Dim dict As MyDictionary = CType(t, MyDictionary)
Answer: A
Microsoft기출문제 70-536-VB 70-536-VB인증 70-536-VB 70-536-VB자격증
NO.14 You are developing an application to assist the user in conducting electronic surveys. The survey
consists of 25 true-or-false questions.
You need to perform the following tasks:
Which storage option should you choose?
A. Dim answers As New BitVector32(1)
B. Dim answers As New BitVector32(-1)
C. Dim answers As New BitArray(1)
D. Dim answers As New BitArray(-1)
Answer: B
Microsoft 70-536-VB 70-536-VB
NO.15 You are testing a newly developed method named PersistToDB. This method accepts a parameter of
type EventLogEntry. This method does not return a value.
You need to create a code segment that helps you to test the method. The code segment must read
entries from the application log of local computers and then pass the entries on to the PersistToDB
method. The code block must pass only events of type Error or Warning from the source MySource to the
PersistToDB method.
Which code segment should you use?
A. Dim myLog As New EventLog("Application", ".")
For Each entry As EventLogEntry In myLog.Entries
If entry.Source = "MySource" Then
PersistToDB(entry)
End If
Next
B. Dim myLog as New EventLog("Application", ".")
myLog.Source = "MySource"
For Each entry As EventLogEntry In myLog.Entries
If entry.EntryType = (EventLogEntryType.Error And _
EventLogEntryType.Warning) Then
PersistToDB(entry)
End If
Next
C. Dim myLog as New EventLog("Application", ".")
For Each entry As EventLogEntry In myLog.Entries
If entry.Source = "MySource" Then
If (entry.EntryType = EventLogEntryType.Error) Or _
(entry.EntryType = EventLogEntryType.Warning) Then
PersistToDB(entry)
End If
End If
Next
D. Dim myLog as New EventLog("Application", ".")
myLog.Source = "MySource"
For Each entry As EventLogEntry In myLog.Entries
If (entry.EntryType = EventLogEntryType.Error) Or _
(entry.EntryType = EventLogEntryType.Warning) Then
PersistToDB(entry)
End If
Next
Answer: C
Microsoft 70-536-VB dump 70-536-VB
NO.16 You are creating a class named Age.
You need to ensure that the Age class is written such that collections of Age objects can be sorted.
Which code segment should you use?
A. Public Class Age
Public Value As Integer
Public Function CompareTo(ByVal obj As Object) As Object
If TypeOf obj Is Age Then
Dim _age As Age = CType(obj, Age)
Return Value.CompareTo(obj)
End If
Throw New ArgumentException("object not an Age")
End Function
End Class
B. Public Class Age
Public Value As Integer
Public Function CompareTo(ByVal iValue As Integer) As Object
Try
Return Value.CompareTo(iValue)
Catch
Throw New ArgumentException ("object not an Age")
End Try
End Function
End Class
C. Public Class Age
Implements IComparable
Public Value As Integer
Public Function CompareTo(ByVal obj As Object) As Integer _
Implements IComparable.CompareTo
If TypeOf obj Is Age Then
Dim _age As Age = CType(obj, Age)
Return Value.CompareTo(_age.Value)
End If
Throw New ArgumentException("object not an Age")
End Function
End Class
D. Public Class Age
Implements IComparable
Public Value As Integer
Public Function CompareTo(ByVal obj As Object) As Integer _
Implements IComparable.CompareTo
Try
Return Value.CompareTo((CType(obj, Age)).Value)
Catch
Return -1
End Try
End Function
End Class
Answer: C
Microsoft 70-536-VB 70-536-VB 70-536-VB
NO.17 You develop a service application named PollingService that periodically calls long-running
procedures. These procedures are called from the DoWork method.
You use the following service application code:
When you attempt to start the service, you receive the following error message: Could not start the
PollingService service on the local computer. Error 1053: The service did not respond to the start or
control request in a timely fashion.
You need to modify the service application code so that the service starts properly.
What should you do?
A. Move the loop code into the constructor of the service class from the OnStart method.
B. Drag a timer component onto the design surface of the service. Move the calls to the long-running
procedure from the OnStart method into the Tick event procedure of the timer, set the Enabled property of
the timer to True, and call the Start method of the timer in the OnStart method.
C. Add a class-level System.Timers.Timer variable to the service class code. Move the call to the DoWork
method into the Elapsed event procedure of the timer, set the Enabled property of the timer to True, and
call the Start method of the timer in the OnStart method.
D. Move the loop code from the OnStart method into the DoWork method.
Answer: C
Microsoft 70-536-VB 70-536-VB 70-536-VB시험문제 70-536-VB
NO.18 You are developing a custom event handler to automatically print all open documents. The event
handler helps specify the number of copies to be printed.
You need to develop a custom event arguments class to pass as a parameter to the event handler.
Which code segment should you use?
A. Public Class PrintingArgs
Private _copies As Integer
Public Sub New(ByVal numberOfCopies As Integer)
Me._copies = numberOfCopies
End Sub
Public ReadOnly Property Copies() As Integer
Get
Return Me._copies
End Get
End Property
End Class
B. Public Class PrintingArgs
Inherits EventArgs
Private _copies As Integer
Public Sub New(ByVal numberOfCopies As Integer)
Me._copies = numberOfCopies
End Sub
Public ReadOnly Property Copies() As Integer
Get
Return Me._copies
End Get
End Property
End Class
C. Public Class PrintingArgs
Private eventArgs As EventArgs
Public Sub New(ByVal args As EventArgs)
Me.eventArgs = args
End Sub
Public ReadOnly Property Args() As EventArgs
Get
Return eventArgs
End Get
End Property
End Class
D. Public Class PrintingArgs
Inherits EventArgs
Private copies As Integer
End Class
Answer: B
Microsoft 70-536-VB 70-536-VB
NO.19 You need to write a multicast delegate that accepts a DateTime argument.
Which code segment should you use?
A. Public Delegate Function PowerDeviceOn( _
ByVal result As Boolean, _
ByVal autoPowerOff As?DateTime) _
As Integer
B. Public Delegate Function PowerDeviceOn( _
ByVal sender As Object, _
ByVal autoPowerOff As EventArgs) _
As Boolean
C. Public Delegate Sub PowerDeviceOn( _
ByVal autoPowerOff As DateTime)
D. Public Delegate Function PowerDeviceOn( _
ByVal autoPowerOff As DateTime) _
As Boolean
Answer: C
Microsoft pdf 70-536-VB기출문제 70-536-VB
NO.20 You are creating an application that retrieves values from a custom section of the application
configuration file. The custom section uses XML as shown in the following block.
You need to write a code segment to define a class named Role. You need to ensure that the Role class is
initialized with values that are retrieved from the custom section of the configuration file.
Which code segment should you use?
A. Public Class Role
Inherits ConfigurationElement
Friend _ElementName As String = "name"
<ConfigurationProperty("role")> _
Public ReadOnly Property Name() As String
Get
Return CType(Me("role"), String)
End Get
End Property
End Class
B. Public Class Role
Inherits ConfigurationElement
Friend _ElementName As String = "role"
<ConfigurationProperty("name", IsRequired:=True)> _
Public ReadOnly Property Name() As String
Get
Return CType(Me("name"), String)
End Get
End Property
End Class
C. Public Class Role
Inherits ConfigurationElement
Friend _ElementName As String = "role"
Private _name As String
<ConfigurationProperty("name")> _
Public ReadOnly Property Name() As String
Get
Return _name
End Get
End Property
End Class
D. Public Class Role
Inherits ConfigurationElement
Friend _ElementName As String = "name"
Private _name As String
<ConfigurationProperty("role", IsRequired:=True)> _
Public ReadOnly Property Name() As String
Get
Return _name
End Get
End Property
End Class
Answer: B
Microsoft 70-536-VB 70-536-VB
ITexamdump의 1Y0-370덤프의 VCE테스트프로그램과 BCP-340덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 C4040-122시험에 대비한 고품질 덤프와 JN0-696시험 최신버전덤프를 제공해드립니다. 최고품질 C_TSCM42_66시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기