Microsoft인증 70-561시험을 패스하여 자격증을 취득하는게 꿈이라구요? ITExamDump에서 고객님의Microsoft인증 70-561시험패스꿈을 이루어지게 지켜드립니다. ITExamDump의 Microsoft인증 70-561덤프는 가장 최신시험에 대비하여 만들어진 공부자료로서 시험패스는 한방에 끝내줍니다.
Microsoft 70-561인증시험은 전업적지식이 강한 인증입니다. IT업계에서 일자리를 찾고 계시다면 많은 회사에서는Microsoft 70-561있는지 없는지에 알고 싶어합니다. 만약Microsoft 70-561자격증이 있으시다면 여러분은 당연히 경쟁력향상입니다.
IT업계에 종사하고 계시나요? 최근 유행하는Microsoft인증 70-561 IT인증시험에 도전해볼 생각은 없으신지요? IT 인증자격증 취득 의향이 있으시면 저희. ITExamDump의 Microsoft인증 70-561덤프로 시험을 준비하시면 100%시험통과 가능합니다. ITExamDump의 Microsoft인증 70-561덤프는 착한 가격에 고품질을 지닌 최고,최신의 버전입니다. ITExamDump덤프로 가볼가요?
ITExamDump는 여러분이 빠른 시일 내에Microsoft 70-561인증시험을 효과적으로 터득할 수 있는 사이트입니다.Microsoft 70-561인증 자격증은 일상생활에 많은 개변을 가져올 수 있는 시험입니다.Microsoft 70-561인증 자격증을 소지한 자들은 당연히 없는 자들보다 연봉이 더 높을 거고 승진기회도 많아지며 IT업계에서의 발전도 무궁무진합니다.
만약 여러분은Microsoft 70-561인증시험취득으로 이 치열한 IT업계경쟁 속에서 자기만의 자리를 잡고, 스펙을 쌓고, 전문적인 지식을 높이고 싶으십니까? 하지만Microsoft 70-561패스는 쉬운 일은 아닙니다.Microsoft 70-561패스는 여러분이 IT업계에 한발작 더 가까워졌다는 뜻이죠. 하지만 이렇게 중요한 시험이라고 많은 시간과 정력을 낭비할필요는 없습니다. ITExamDump의 완벽한 자료만으로도 가능합니다. ITExamDump의 덤프들은 모두 전문적으로 IT관련인증시험에 대하여 연구하여 만들어진것이기 때문입니다.
시험 번호/코드: 70-561
시험 이름: Microsoft (TS: MS .NET Framework 3.5, ADO.NET Application Development)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 170 문항
업데이트: 2013-09-29
ITExamDump의 Microsoft인증 70-561덤프를 구매하여 공부한지 일주일만에 바로 시험을 보았는데 고득점으로 시험을 패스했습니다.이는ITExamDump의 Microsoft인증 70-561덤프를 구매한 분이 전해온 희소식입니다. 다른 자료 필요없이 단지 저희Microsoft인증 70-561덤프로 이렇게 어려운 시험을 일주일만에 패스하고 자격증을 취득할수 있습니다.덤프가격도 다른 사이트보다 만만하여 부담없이 덤프마련이 가능합니다.구매전 무료샘플을 다운받아 보시면 믿음을 느낄것입니다.
70-561 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-561.html
NO.1 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment.
Dim query As String = _ "Select EmpNo, EmpName from dbo.Table_1; " + _ "select Name,Age from
dbo.Table_2"
Dim command As New SqlCommand(query, connection)
Dim reader As SqlDataReader = command.ExecuteReader()
You need to ensure that the application reads all the rows returned by the code segment.
Which code segment should you use?
A. While reader.NextResult()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
reader.Read()
End While
B. While reader.Read()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
reader.NextResult()
End While
C. While reader.Read()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
End While
reader.NextResult()
while reader.Read()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
End While
D. While reader.NextResult()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
End While
reader.Read()
while reader.NextResult()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
End While
Answer: C
Microsoft dumps 70-561 70-561 70-561자격증
NO.2 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The connection string of the application is defined in the following manner.
"Server=Prod;Database=WingtipToys;Integrated
Security=SSPI;Asynchronous Processing=true"
The application contains the following code segment. (Line numbers are included for reference only.)
01 Protected Sub UpdateData(ByVal cmd As SqlCommand)
02 cmd.Connection.Open()
03
04 lblResult.Text = "Updating ..."
05 End Sub
The cmd object takes a long time to execute.
You need to ensure that the application continues to execute while cmd is executing.
What should you do?
A. Insert the following code segment at line 03.
cmd.BeginExecuteNonQuery(New AsyncCallback( _
AddressOf UpdateComplete), cmd)
Add the following code segment.
Private Sub UpdateComplete (ByVal ar As IAsyncResult)
Dim count As Integer = CInt(ar.AsyncState)
LogResults(count)
End Sub
B. Insert the following code segment at line 03.
cmd.BeginExecuteNonQuery(New AsyncCallback( _
AddressOf UpdateComplete), cmd)
Add the following code segment.
Private Sub UpdateComplete(ByVal ar As IAsyncResult)
Dim cmd As SqlCommand = DirectCast(ar.AsyncState, SqlCommand)
Dim count As Integer = cmd.EndExecuteNonQuery(ar)
LogResults(count)
End Sub
C. Insert the following code segment at line 03.
AddHandler cmd.StatementCompleted, AddressOf UpdateComplete
cmd.ExecuteNonQuery()
Add the following code segment.
Private Sub UpdateComplete(ByVal sender As Object, _
ByVal e As StatementCompletedEventArgs)
Dim count As Integer = e.RecordCount
LogResults(count)
End Sub
D. Insert the following code segment at line 03.
Dim notification As New _
SqlNotificationRequest("UpdateComplete ", "", 10000)
cmd.Notification = notification
cmd.ExecuteNonQuery()
Add the following code segment.
Private Sub UpdateComplete (ByVal notice As SqlNotificationRequest)
Dim count As Integer = Integer.Parse(notice.UserData)
LogResults(count)
End Sub
Answer: B
Microsoft 70-561 70-561시험문제
NO.3 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment. (Line numbers are included for reference only.)
01 Using connection As New SqlConnection(connectionString)
02 Dim cmd As New SqlCommand(queryString, connection)
03 connection.Open()
04
05 While sdrdr.Read()
06 ' use the data in the reader
07 End While
08 End Using
You need to ensure that the memory is used efficiently when retrieving BLOBs from the database.
Which code segment should you insert at line 04?
A. Dim sdrdr As SqlDataReader = _ cmd.ExecuteReader()
B. Dim sdrdr As SqlDataReader = _ cmd.ExecuteReader(CommandBehavior.[Default])
C. Dim sdrdr As SqlDataReader = _ cmd.ExecuteReader(CommandBehavior.SchemaOnly)
D. Dim sdrdr As SqlDataReader = _ cmd.ExecuteReader(CommandBehavior.SequentialAccess)
Answer: D
Microsoft기출문제 70-561인증 70-561 70-561
NO.4 {
NO.5 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
You need to ensure that the application can connect to any type of database.
What should you do?
A. Set the database driver name in the connection string of the application, and then create the
connection object in the following manner.
Dim connection As DbConnection = _ New OdbcConnection(connectionString)
B. Set the database provider name in the connection string of the application, and then create the
connection object in the following manner.
Dim connection As DbConnection = _ New OleDbConnection(connectionString)
C. Create the connection object in the following manner.
Dim factory As DbProviderFactory = _ DbProviderFactories.GetFactory("System.Data.Odbc")
Dim connection As DbConnection = _ factory.CreateConnection()
D. Create the connection object in the following manner.
Dim factory As DbProviderFactory = _ DbProviderFactories.GetFactory(databaseProviderName)
Dim connection As DbConnection = factory.CreateConnection()
Answer: D
Microsoft 70-561 dump 70-561시험문제 70-561기출문제
NO.6 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a SqlDataAdapter object named daOrder. The SelectCommand property of the
daOrder object is set.
You write the following code segment. (Line numbers are included for reference only.)
01 private void ModifyDataAdapter() {
02
03 }
You need to ensure that the daOrder object can also handle updates.
Which code segment should you insert at line 02?
A. SqlCommandBuilder cb = new SqlCommandBuilder(daOrder);
cb.RefreshSchema();
B. SqlCommandBuilder cb = new SqlCommandBuilder(daOrder);
cb.SetAllValues = true;
C. SqlCommandBuilder cb = new SqlCommandBuilder(daOrder);
daOrder.DeleteCommand = cb.GetDeleteCommand();
daOrder.InsertCommand = cb.GetInsertCommand();
daOrder.UpdateCommand = cb.GetUpdateCommand();
D. SqlCommandBuilder cb = new SqlCommandBuilder(daOrder);
cb.RefreshSchema();
cb.GetDeleteCommand();
cb.GetInsertCommand();
cb.GetUpdateCommand();
Answer: C
Microsoft덤프 70-561 70-561
NO.7 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a SqlDataAdapter object named daOrder. The SelectCommand property of the
daOrder object is set.
You write the following code segment. (Line numbers are included for reference only.)
01 Private Sub ModifyDataAdapter()
02
03 End Sub
You need to ensure that the daOrder object can also handle updates.
Which code segment should you insert at line 02?
A. Dim cb As New SqlCommandBuilder(daOrder)
cb.RefreshSchema()
B. Dim cb As New SqlCommandBuilder(daOrder)
cb.SetAllValues = True
C. Dim cb As New SqlCommandBuilder(daOrder)
daOrder.DeleteCommand = cb.GetDeleteCommand()
daOrder.InsertCommand = cb.GetInsertCommand()
daOrder.UpdateCommand = cb.GetUpdateCommand()
D. Dim cb As New SqlCommandBuilder(daOrder)
cb.RefreshSchema()
cb.GetDeleteCommand()
cb.GetInsertCommand()
cb.GetUpdateCommand()
Answer: C
Microsoft시험문제 70-561 70-561 pdf 70-561
NO.8 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
You need to ensure that the application can connect to any type of database.
What should you do?
A. Set the database driver name in the connection string of the application, and then create the
connection object in the following manner.
DbConnection connection = new OdbcConnection(connectionString);
B. Set the database provider name in the connection string of the application, and then create the
connection object in the following manner.
DbConnection connection = new OleDbConnection(connectionString);
C. Create the connection object in the following manner.
DbProviderFactory factory = DbProviderFactories.GetFactory("System.Data.Odbc");
DbConnection connection = factory.CreateConnection();
D. Create the connection object in the following manner.
DbProviderFactory factory = DbProviderFactories.GetFactory(databaseProviderName);
DbConnection connection = factory.CreateConnection();
Answer: D
Microsoft 70-561최신덤프 70-561 70-561
NO.9 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The application throws an exception when the SQL Connection object is used.
You need to handle the exception.
Which code segment should you use?
A. try
{
if(null!=conn)
conn.Close();
// code for the query
}
catch (Exception ex)
{
// handle exception
}
finally
{
if(null==conn)
conn.Open();
}
B. try
{
conn.Close();
// code for the query
}
catch (Exception ex)
{
// handle exception
}
finally
{
if(null!=conn)
conn.Open();
}
C. try
{
conn.Open();
// code for the query
}
catch (Exception ex)
{
// handle exception
}
finally
{
if(null!=conn)
conn.Close();
}
D. try
{
conn.Open();
// code for the query
}
catch (Exception ex)
{
// handle exception
}
finally
{
if(null==conn)
conn.Close();
}
Answer: C
Microsoft기출문제 70-561 pdf 70-561기출문제 70-561덤프
NO.10 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application has a DataTable object named OrderDetailTable. The object has the following columns:
ID
OrderID
ProductID
Quantity
LineTotal
The OrderDetailTable object is populated with data provided by a business partner. Some of the records
contain a null value in the LineTotal field and 0 in the Quantity field.
You write the following code segment. (Line numbers are included for reference only.)
01 Dim col As New DataColumn("UnitPrice", GetType(Decimal))
02
03 OrderDetailTable.Columns.Add(col)
You need to add a DataColumn named UnitPrice to the OrderDetailTable object.
Which line of code should you insert at line 02?
A. col.Expression = "LineTotal/Quantity"
B. col.Expression = "LineTotal/ISNULL(Quantity, 1)"
C. col.Expression = "LineTotal.Value/ISNULL(Quantity.Value, 1)"
D. col.Expression = "iif(Quantity > 0, LineTotal/Quantity, 0)"
Answer: D
Microsoft 70-561 70-561 70-561 70-561
NO.11 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You need to separate the security-related exceptions from the other exceptions for database operations at
run time.
Which code segment should you use?
A. Catch ex As System.Security.SecurityException
'Handle all database security related exceptions.
End Try
B. Catch ex As System.Data.SqlClient.SqlException
For i As Integer = 0 To ex.Errors.Count - 1
If ex.Errors(i).[Class].ToString() = "14" Then
'Handle all database security related exceptions.
Else
'Handle other exceptions
End If
Next
End Try
C. Catch ex As System.Data.SqlClient.SqlException
For i As Integer = 0 To ex.Errors.Count - 1
If ex.Errors(i).Number = 14 Then
'Handle all database security related exceptions.
Else
'Handle other exceptions
End If
Next
End Try
D. Catch ex As System.Data.SqlClient.SqlException
For i As Integer = 0 To ex.Errors.Count - 1
If ex.Errors(i).Message.Contains("Security") Then
'Handle all database security related exceptions.
Else
'Handle other exceptions
End If
Next
End Try
Answer: B
Microsoft인증 70-561최신덤프 70-561
NO.12 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a DataSet object named OrderDS that has the Order and OrderDetail tables as
shown in the following exhibit.
You write the following code segment. (Line numbers are included for reference only.)
01 Private Sub GetOrders(ByVal cn As SqlConnection)
02 Dim cmd As SqlCommand = cn.CreateCommand()
03 cmd.CommandText = "Select * from [Order]; " + _
"Select * from [OrderDetail];"
04 Dim da As New SqlDataAdapter(cmd)
05
06 End Sub
You need to ensure that the Order and the OrderDetail tables are populated.
Which code segment should you insert at line 05?
A. da.Fill(OrderDS)
B. da.Fill(OrderDS.Order)
da.Fill(OrderDS.OrderDetail)
C. da.TableMappings.AddRange(New DataTableMapping() _
{New DataTableMapping("Table", "Order"), _
New DataTableMapping("Table1", "OrderDetail")})
da.Fill(OrderDS)
D. Dim mapOrder As New DataTableMapping()
mapOrder.DataSetTable = "Order"
Dim mapOrderDetail As New DataTableMapping()
mapOrder.DataSetTable = "OrderDetail"
da.TableMappings.AddRange(New DataTableMapping() _
{mapOrder, mapOrderDetail})
da.Fill(OrderDS)
Answer: C
Microsoft 70-561자격증 70-561기출문제 70-561 70-561
NO.13 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment.
Dim queryString As String = "Select Name, Age from dbo.Table_1"
Dim command As New _SqlCommand(queryString, DirectCast(connection, SqlConnection))
You need to get the value that is contained in the first column of the first row of the result set returned by
the query.
Which code segment should you use?
A. Dim value As Object = command.ExecuteScalar()
Dim requiredValue As String = value.ToString()
B. Dim value As Integer = command.ExecuteNonQuery()
Dim requiredValue As String = value.ToString()
C. Dim value As SqlDataReader = _command.ExecuteReader(CommandBehavior.SingleRow)
Dim requiredValue As String = value(0).ToString()
D. Dim value As SqlDataReader = _command.ExecuteReader(CommandBehavior.SingleRow)
Dim requiredValue As String = value(1).ToString()
Answer: A
Microsoft 70-561 70-561 70-561최신덤프
NO.14 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The application analyzes large amounts of transaction data that are stored in a different database.
You write the following code segment. (Line numbers are included for reference only.)
01 using (SqlConnection connection = new
SqlConnection(sourceConnectionString))
02 using (SqlConnection connection2 = new
SqlConnection(destinationConnectionString))
03 using (SqlCommand command = new SqlCommand())
04 {
05 connection.Open();
06 connection2.Open();
07 using (SqlDataReader reader = command.ExecuteReader())
08 {
09 using (SqlBulkCopy bulkCopy = new
SqlBulkCopy(connection2))
10 {
11
12 }
13 }
14 }
You need to copy the transaction data to the database of the application.
Which code segment should you insert at line 11?
A. reader.Read()
bulkCopy.WriteToServer(reader);
B. bulkCopy.DestinationTableName = "Transactions";
bulkCopy.WriteToServer(reader);
C. bulkCopy.DestinationTableName = "Transactions";
bulkCopy.SqlRowsCopied += new
SqlRowsCopiedEventHandler(bulkCopy_SqlRowsCopied);
D. while (reader.Read())
{
bulkCopy.WriteToServer(reader);
}
Answer: B
Microsoft dumps 70-561덤프 70-561 dump 70-561 70-561
NO.15 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment. (Line numbers are included for reference only.)
01 using (SqlConnection connection = new
SqlConnection(connectionString)) {
02 SqlCommand cmd = new SqlCommand(queryString, connection);
03 connection.Open();
04
05 while (sdrdr.Read()){
06 // use the data in the reader
07 }
08 }
You need to ensure that the memory is used efficiently when retrieving BLOBs from the database.
Which code segment should you insert at line 04?
A. SqlDataReader sdrdr = cmd.ExecuteReader();
B. SqlDataReader sdrdr = cmd.ExecuteReader(CommandBehavior.Default);
C. SqlDataReader sdrdr = cmd.ExecuteReader(CommandBehavior.SchemaOnly);
D. SqlDataReader sdrdr = cmd.ExecuteReader(CommandBehavior.SequentialAccess);
Answer: D
Microsoft인증 70-561인증 70-561인증
NO.16 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The application analyzes large amounts of transaction data that are stored in a different database.
You write the following code segment. (Line numbers are included for reference only.)
01 Using connection As New SqlConnection(sourceConnectionString)
02 Using connection2 As _
New SqlConnection(destinationConnectionString)
03 Using command As New SqlCommand()
04 connection.Open()
05 connection2.Open()
06 Using reader As SqlDataReader = command.ExecuteReader()
07 Using bulkCopy As New SqlBulkCopy(connection2)
08
09 End Using
10 End Using
11 End Using
12 End Using
13 End Using
You need to copy the transaction data to the database of the application.
Which code segment should you insert at line 08?
A. reader.Read()
bulkCopy.WriteToServer(reader)
B. bulkCopy.DestinationTableName = "Transactions"
bulkCopy.WriteToServer(reader)
C. bulkCopy.DestinationTableName = "Transactions"
AddHandler bulkCopy.SqlRowsCopied, _
AddressOf bulkCopy_SqlRowsCopied
D. While reader.Read()
bulkCopy.WriteToServer(reader)
End While
Answer: B
Microsoft 70-561 70-561 70-561
NO.17 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a TextBox control named txtProductID. The application will return a list of active
products that have the ProductID field equal to the txtProductID.Text property.
You write the following code segment. (Line numbers are included for reference only.)
01 private DataSet GetProducts(SqlConnection cn) {
02 SqlCommand cmd = new SqlCommand();
03 cmd.Connection = cn;
04 SqlDataAdapter da = new SqlDataAdapter(cmd);
05 DataSet ds = new DataSet();
06
07 da.Fill(ds);
08 return ds;
09 }
You need to populate the DataSet object with product records while avoiding possible SQL injection
attacks.
Which code segment should you insert at line 06?
A. cmd.CommandText = string.Format("sp_sqlexec 'SELECT ProductID,
Name FROM Product WHERE ProductID={0} AND IsActive=1'", txtProductID.Text);
B. cmd.CommandText = string.Format("SELECT ProductID, Name FROM
Product WHERE ProductID={0} AND IsActive=1", txtProductID.Text);
cmd.Prepare();
C. cmd.CommandText = string.Format("SELECT ProductID, Name FROM
Product WHERE ProductID={0} AND IsActive=1", txtProductID.Text);
cmd.CommandType = CommandType.TableDirect;
D. cmd.CommandText = "SELECT ProductID, Name FROM Product WHERE
ProductID=@productID AND IsActive=1";
cmd.Parameters.AddWithValue("@productID", txtProductID.Text);
Answer: D
Microsoft dump 70-561 dumps 70-561시험문제 70-561시험문제 70-561
NO.18 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment.
string queryString = "Select Name, Age from dbo.Table_1";
SqlCommand command = new SqlCommand(queryString, (SqlConnection)connection));
You need to get the value that is contained in the first column of the first row of the result set returned by
the query.
Which code segment should you use?
A. var value = command.ExecuteScalar();
string requiredValue = value.ToString();
B. var value = command.ExecuteNonQuery();
string requiredValue = value.ToString();
C. var value = command.ExecuteReader(CommandBehavior.SingleRow);
string requiredValue = value[0].ToString();
D. var value = command.ExecuteReader(CommandBehavior.SingleRow);
string requiredValue = value[1].ToString();
Answer: A
Microsoft자격증 70-561자료 70-561 dump 70-561
NO.19 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application has a DataTable object named OrderDetailTable. The object has the following columns:
ID
OrderID
ProductID
Quantity
LineTotal
The OrderDetailTable object is populated with data provided by a business partner. Some of the records
contain a null value in the LineTotal field and 0 in the Quantity field.
You write the following code segment. (Line numbers are included for reference only.)
01 DataColumn col = new DataColumn("UnitPrice", typeof(decimal));
02
03 OrderDetailTable.Columns.Add(col);
You need to add a DataColumn named UnitPrice to the OrderDetailTable object.
Which line of code should you insert at line 02?
A. col.Expression = "LineTotal/Quantity";
B. col.Expression = "LineTotal/ISNULL(Quantity, 1)";
C. col.Expression = "LineTotal.Value/ISNULL(Quantity.Value,1)";
D. col.Expression = "iif(Quantity > 0, LineTotal/Quantity, 0)";
Answer: D
Microsoft dumps 70-561자격증 70-561 70-561
NO.20 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a DataSet object named OrderDS that has the Order and OrderDetail tables as
shown in the following exhibit.
You write the following code segment. (Line numbers are included for reference only.)
01 private void GetOrders(SqlDataConnection cn) {
02 SqlCommand cmd = cn.CreateCommand();
03 cmd.CommandText = "Select * from [Order];
Select * from [OrderDetail];";
04 SqlDataAdapter da = new SqlDataAdapter(cmd);
05
06 }
You need to ensure that the Order and the OrderDetail tables are populated.
Which code segment should you insert at line 05?
A. da.Fill(OrderDS);
B. da.Fill(OrderDS.Order);
da.Fill(OrderDS.OrderDetail);
C. da.TableMappings.AddRange(new DataTableMapping[] {
new DataTableMapping("Table", "Order"),
new DataTableMapping("Table1", "OrderDetail")});
da.Fill(OrderDS);
D. DataTableMapping mapOrder = new DataTableMapping();
mapOrder.DataSetTable = "Order";
DataTableMapping mapOrderDetail = new DataTableMapping();
mapOrder.DataSetTable = "OrderDetail";
da.TableMappings.AddRange(new DataTableMapping[]
{ mapOrder, mapOrderDetail });
Da.Fill(OrderDS);
Answer: C
Microsoft덤프 70-561 70-561시험문제 70-561
NO.21 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application uses Microsoft SQL Server 2005.
You write the following code segment. (Line numbers are included for reference only.)
01 String myConnString = "User
02 ID=<username>;password=<strong password>;Initial
03 Catalog=pubs;Data Source=myServer";
04 SqlConnection myConnection = new
05 SqlConnection(myConnString);
06 SqlCommand myCommand = new SqlCommand();
07 DbDataReader myReader;
08 myCommand.CommandType =
09 CommandType.Text;
10 myCommand.Connection = myConnection;
11 myCommand.CommandText = "Select * from Table1;
Select * from Table2;";
12 int RecordCount = 0;
13 try
14 {
15 myConnection.Open();
16
17 }
18 catch (Exception ex)
19 {
20 }
21 finally
NO.22 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You need to separate the security-related exceptions from the other exceptions for database operations at
run time.
Which code segment should you use?
A. catch (System.Security.SecurityException ex)
{
//Handle all database security related exceptions.
}
B. catch (System.Data.SqlClient.SqlException ex)
{
for (int i = 0; i < ex.Errors.Count; i++){
if (ex.Errors[i].Class.ToString() == "14") {
//Handle all database security related exceptions.
}
else{
//Handle other exceptions
}
}
}
C. catch (System.Data.SqlClient.SqlException ex)
{
for (int i = 0; i < ex.Errors.Count; i++){
if (ex.Errors[i].Number == 14){
//Handle all database security related exceptions.
}
else{
//Handle other exceptions
}
}
}
D. catch (System.Data.SqlClient.SqlException ex)
{
for (int i = 0; i < ex.Errors.Count; i++){
if (ex.Errors[i].Message.Contains("Security")){
//Handle all database security related exceptions.
}
else{
//Handle other exceptions
}
}
}
Answer: B
Microsoft 70-561 70-561
NO.23 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a DataSet object named orderDS. The object contains a table named Order as
shown in the following exhibit.
The application uses a SqlDataAdapter object named daOrder to populate the Order table.
You write the following code segment. (Line numbers are included for reference only.)
01 Private Sub FillOrderTable(ByVal pageIndex As Integer)
02 Dim pageSize As Integer = 5
03
04 End Sub
You need to fill the Order table with the next set of 5 records for each increase in the pageIndex value.
Which code segment should you insert at line 03?
A. Dim sql As String = "SELECT SalesOrderID, CustomerID, " + _
"OrderDate FROM Sales.SalesOrderHeader"
daOrder.SelectCommand.CommandText = sql
daOrder.Fill(orderDS, pageIndex, pageSize, "Order")
B. Dim startRecord As Integer = (pageIndex - 1) * pageSize
Dim sql As String = "SELECT SalesOrderID, CustomerID, " + _
"OrderDate FROM Sales.SalesOrderHeader"
daOrder.SelectCommand.CommandText = sql
daOrder.Fill(orderDS, startRecord, pageSize, "Order")
C. Dim sql As String = _
String.Format("SELECT TOP {0} SalesOrderID, " + _
"CustomerID, OrderDate FROM Sales.SalesOrderHeader " + _
"WHERE SalesOrderID > {1}", pageSize, pageIndex)
daOrder.SelectCommand.CommandText = sql
daOrder.Fill(orderDS, "Order")
D. Dim startRecord As Integer = (pageIndex - 1) * pageSize
Dim sql As String = _
String.Format("SELECT TOP {0} SalesOrderID, " + _
"CustomerID, OrderDate FROM Sales.SalesOrderHeader " + _
"WHERE SalesOrderID > {1}", pageSize, startRecord)
daOrder.SelectCommand.CommandText = sql
daOrder.Fill(orderDS, "Order")
Answer: B
Microsoft덤프 70-561 70-561기출문제 70-561자료
NO.24 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The application throws an exception when the SQL Connection object is used.
You need to handle the exception.
Which code segment should you use?
A. Try
If conn IsNot Nothing Then
conn.Close()
' code for the query
End If
Catch ex As Exception
' handle exception
Finally
If conn Is Nothing Then
conn.Open()
End If
End Try
B. Try
' code for the query
conn.Close()
Catch ex As Exception
' handle exception
Finally
If conn IsNot Nothing Then
conn.Open()
End If
End Try
C. Try
' code for the query
conn.Open()
Catch ex As Exception
' handle exception
Finally
If conn IsNot Nothing Then
conn.Close()
End If
End Try
D. Try
' code for the query
conn.Open()
Catch ex As Exception
' handle exception
Finally
If conn Is Nothing Then
conn.Close()
End If
End Try
Answer: C
Microsoft 70-561 70-561 70-561 pdf 70-561
NO.25 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a DataSet object named orderDS. The object contains a table named Order as
shown in the following exhibit.
The application uses a SqlDataAdapter object named daOrder to populate the Order table.
You write the following code segment. (Line numbers are included for reference only.)
01 private void FillOrderTable(int pageIndex) {
02 int pageSize = 5;
03
04 }
You need to fill the Order table with the next set of 5 records for each increase in the pageIndex value.
Which code segment should you insert at line 03?
A. string sql = "SELECT SalesOrderID, CustomerID, OrderDate FROM Sales.SalesOrderHeader";
daOrder.SelectCommand.CommandText = sql;
daOrder.Fill(orderDS, pageIndex, pageSize, "Order");
B. int startRecord = (pageIndex - 1) * pageSize;
string sql = "SELECT SalesOrderID, CustomerID, OrderDate FROM Sales.SalesOrderHeader";
daOrder.SelectCommand.CommandText = sql;
daOrder.Fill(orderDS, startRecord, pageSize, "Order");
C. string sql = string.Format("SELECT TOP {0} SalesOrderID, CustomerID,
OrderDate FROM Sales.SalesOrderHeader WHERE SalesOrderID > {1}", pageSize, pageIndex);
daOrder.SelectCommand.CommandText = sql;
daOrder.Fill(orderDS, "Order");
D. int startRecord = (pageIndex - 1) * pageSize;
string sql = string.Format("SELECT TOP {0} SalesOrderID, CustomerID,
OrderDate FROM Sales.SalesOrderHeader WHERE SalesOrderID > {1}",
pageSize, startRecord);
daOrder.SelectCommand.CommandText = sql;
daOrder.Fill(orderDS, "Order");
Answer: B
Microsoft dump 70-561최신덤프 70-561 70-561 70-561기출문제 70-561자료
NO.26 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a TextBox control named txtProductID. The application will return a list of active
products that have the ProductID field equal to the txtProductID.Text property.
You write the following code segment. (Line numbers are included for reference only.)
01 Private Function GetProducts(ByVal cn _
As SqlConnection) As DataSet
02 Dim cmd As New SqlCommand()
03 cmd.Connection = cn
04 Dim da As New SqlDataAdapter(cmd)
05 Dim ds As New DataSet()
06
07 da.Fill(ds)
08 Return ds
09 End Function
You need to populate the DataSet object with product records while avoiding possible SQL injection
attacks.
Which code segment should you insert at line 06?
A. cmd.CommandText = _
String.Format("sp_sqlexec 'SELECT ProductID, " + _
"Name FROM Product WHERE ProductID={0} AND IsActive=1'", _
txtProductID.Text)
B. cmd.CommandText = _
String.Format("SELECT ProductID, " + _
"Name FROM Product WHERE ProductID={0} AND IsActive=1", _
txtProductID.Text)
cmd.Prepare()
C. cmd.CommandText = _
String.Format("SELECT ProductID, " + _
"Name FROM Product WHERE ProductID={0} AND IsActive=1", _
txtProductID.Text)
cmd.CommandType = CommandType.TableDirect
D. cmd.CommandText = "SELECT ProductID, " + _
"Name FROM Product WHERE ProductID=@productID AND IsActive=1"
cmd.Parameters.AddWithValue("@productID", txtProductID.Text)
Answer: D
Microsoft dumps 70-561 70-561최신덤프 70-561
NO.27 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment.
string query = "Select EmpNo, EmpName from dbo.Table_1;
select Name,Age from dbo.Table_2";
SqlCommand command = new SqlCommand(query, connection);
SqlDataReader reader = command.ExecuteReader();
You need to ensure that the application reads all the rows returned by the code segment.
Which code segment should you use?
A. while (reader.NextResult())
{
Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
reader.Read();
}
B. while (reader.Read())
{
Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
reader.NextResult();
}
C. while (reader.Read())
{
Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
}
reader.NextResult();
while (reader.Read())
{
Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
}
D. while (reader.NextResult())
{
Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
}
reader.Read();
while (reader.NextResult())
{
Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
}
Answer: C
Microsoft시험문제 70-561최신덤프 70-561 dumps 70-561시험문제
NO.28 myConnection.Close();
NO.29 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The connection string of the application is defined in the following manner.
"Server=Prod;Database=WingtipToys;Integrated
Security=SSPI;Asynchronous Processing=true"
The application contains the following code segment. (Line numbers are included for reference only.)
01 protected void UpdateData(SqlCommand cmd) {
02 cmd.Connection.Open();
03
04 lblResult.Text = "Updating ...";
05 }
The cmd object takes a long time to execute.
You need to ensure that the application continues to execute while cmd is executing.
What should you do?
A. Insert the following code segment at line 03.
cmd.BeginExecuteNonQuery(new AsyncCallback(UpdateComplete), cmd);
Add the following code segment.
private void UpdateComplete (IAsyncResult ar) {
int count = (int)ar.AsyncState;
LogResults(count);
}
B. Insert the following code segment at line 03.
cmd.BeginExecuteNonQuery(new AsyncCallback(UpdateComplete), cmd);
Add the following code segment.
private void UpdateComplete (IAsyncResult ar) {
SqlCommand cmd = (SqlCommand)ar.AsyncState;
int count = cmd.EndExecuteNonQuery(ar);
LogResults(count);
}
C. Insert the following code segment at line 03.
cmd.StatementCompleted += new
StatementCompletedEventHandler(UpdateComplete);
cmd.ExecuteNonQuery();
Add the following code segment.
private void UpdateComplete (object sender, StatementCompletedEventArgs e) {
int count = e.RecordCount;
LogResults(count);
}
D. Insert the following code segment at line 03.
SqlNotificationRequest notification = new
SqlNotificationRequest("UpdateComplete", "", 10000);
cmd.Notification = notification;
cmd.ExecuteNonQuery();
Add the following code segment.
private void UpdateComplete(SqlNotificationRequest notice) {
int count = int.Parse(notice.UserData);
LogResults(count);
}
Answer: B
Microsoft덤프 70-561자격증 70-561인증
NO.30 }
You need to compute the total number of records processed by the Select queries in the RecordCount
variable.
Which code segment should you insert at line 16?
A. myReader = myCommand.ExecuteReader();
RecordCount = myReader.RecordsAffected;
B. while (myReader.Read())
{
//Write logic to process data for the first result.
}
RecordCount = myReader.RecordsAffected;
C. while (myReader.HasRows)
{
while (myReader.Read())
{
//Write logic to process data for the second result.
RecordCount = RecordCount + 1;
myReader.NextResult();
}
}
D. while (myReader.HasRows)
{
while (myReader.Read())
{
//Write logic to process data for the second result.
RecordCount = RecordCount + 1;
}
myReader.NextResult();
}
Answer: D
Microsoft 70-561 70-561
22. You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application uses Microsoft SQL Server 2005.
You write the following code segment. (Line numbers are included for reference only.)
01 Dim myConnString As String = _
02 "User ID=<username>;password=<strong password>;" + _
03 "Initial Catalog=pubs;Data Source=myServer"
04 Dim myConnection As New SqlConnection(myConnString)
05 Dim myCommand As New SqlCommand()
06 Dim myReader As DbDataReader
07 myCommand.CommandType = CommandType.Text
08 myCommand.Connection = myConnection
09 myCommand.CommandText = _
10 "Select * from Table1;Select * from Table2;"
11 Dim RecordCount As Integer = 0
12 Try
13 myConnection.Open()
14
15 Catch ex As Exception
16 Finally
17 myConnection.Close()
18 End Try
You need to compute the total number of records processed by the Select queries in the RecordCount
variable.
Which code segment should you insert at line 14?
A. myReader = myCommand.ExecuteReader()
RecordCount = myReader.RecordsAffected
B. While myReader.Read()
'Write logic to process data for the first result.
End While
RecordCount = myReader.RecordsAffected
C. While myReader.HasRows
While myReader.Read()
'Write logic to process data for the second result.
RecordCount = RecordCount + 1
myReader.NextResult()
End While
End While
D. While myReader.HasRows
While myReader.Read()
'Write logic to process data for the second result.
RecordCount = RecordCount + 1
End While
myReader.NextResult()
End While
Answer: D
Microsoft 70-561 70-561 70-561기출문제 70-561
23. You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application uses data from a Microsoft SQL Server 2005 database table. A Web page of the
application contains a GridView server control.
You write the following code segment. (Line numbers are included for reference only.)
01 private void LoadGrid()
02 {
03 using (SqlCommand command = new SqlCommand())
04 {
05 command.Connection = connection;
06 command.CommandText = "SELECT * FROM Customers";
07 connection.Open();
08
09 }
10 }
You need to retrieve the data from the database table and bind the data to the DataSource property of the
GridView server control.
Which code segment should you insert at line 08?
A. SqlDataReader rdr = command.ExecuteReader();
connection.Close();
GridView1.DataSource = rdr;
GridView1.DataBind();
B. SqlDataReader rdr = command.ExecuteReader();
GridView1.DataSource = rdr.Read();
GridView1.DataBind();
connection.Close();
C. SqlDataReader rdr = command.ExecuteReader();
Object[] values = new Object[rdr.FieldCount];
GridView1.DataSource = rdr.GetValues(values);
GridView1.DataBind();
connection.Close();
D. DataTable dt = new DataTable();
using (SqlDataReader reader = command.ExecuteReader())
{
dt.Load(reader);
}
connection.Close();
GridView1.DataSource = dt;
GridView1.DataBind();
Answer: D
Microsoft덤프 70-561 dumps 70-561 dumps
24. You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application uses data from a Microsoft SQL Server 2005 database table. A Web page of the
application contains a GridView server control.
You write the following code segment. (Line numbers are included for reference only.)
01 Private Sub LoadGrid()
02 Using command As New SqlCommand()
03 command.Connection = connection
04 command.CommandText = "SELECT * FROM Customers"
05 connection.Open()
06
07 End Using
08 End Sub
You need to retrieve the data from the database table and bind the data to the DataSource property of the
GridView server control.
Which code segment should you insert at line 06?
A. Dim rdr As SqlDataReader = command.ExecuteReader()
connection.Close()
GridView1.DataSource = rdr
GridView1.DataBind()
B. Dim rdr As SqlDataReader = command.ExecuteReader()
GridView1.DataSource = rdr.Read()
GridView1.DataBind()
connection.Close()
C. Dim rdr As SqlDataReader = command.ExecuteReader()
Dim values As Object() = New Object(rdr.FieldCount - 1) {}
GridView1.DataSource = rdr.GetValues(values)
GridView1.DataBind()
D. Dim dt As New DataTable()
Using reader As SqlDataReader = command.ExecuteReader()
dt.Load(reader)
End Using
connection.Close()
GridView1.DataSource = dt
GridView1.DataBind()
Answer: D
Microsoft 70-561 pdf 70-561 dump 70-561 70-561 dumps 70-561
ITexamdump의 1z0-599덤프의 VCE테스트프로그램과 LOT-404덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-318시험에 대비한 고품질 덤프와 000-350시험 최신버전덤프를 제공해드립니다. 최고품질 C_THR12_66시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
시험자료링크: http://www.itexamdump.com/70-561.html
