ITExamDump에서는Juniper 인증JN0-303시험대비덤프를 발췌하여 제공해드립니다. Juniper 인증JN0-303시험대비덤프에는 시험문제의 모든 예상문제와 시험유형이 포함되어있어 시험준비자료로서 가장 좋은 선택입니다. ITExamDump에서 제공해드리는 전면적인Juniper 인증JN0-303시험대비덤프로Juniper 인증JN0-303시험준비공부를 해보세요. 통과율이 100%입니다.
ITExamDump는 여러분을 성공으로 가는 길에 도움을 드리는 사이트입니다. ITExamDump에서는 여러분이 안전하게 간단하게Juniper인증JN0-694시험을 패스할 수 있는 자료들을 제공함으로 빠른 시일 내에 IT관련지식을 터득하고 한번에 시험을 패스하실 수 있습니다.
Juniper인증 JN0-694시험을 등록했는데 마땅한 공부자료가 없어 고민중이시라면ITExamDump의Juniper인증 JN0-694덤프를 추천해드립니다. ITExamDump의Juniper인증 JN0-694덤프는 거의 모든 시험문제를 커버하고 있어 시험패스율이 100%입니다. ITExamDump제품을 선택하시면 어려운 시험공부도 한결 가벼워집니다.
시험 이름: Juniper networks Certified internet specialist.m(jncis-m)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 JN0-303기출문제
100% 합격율 보장
Q&A: 150 문항 JN0-303자격증자료
업데이트: 2014-06-08
JN0-303기출문제: >>펼쳐보기
시험 이름: Enterprise Routing and Switching Support, Professional (JNCSP-ENT)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 JN0-694시험자료
100% 합격율 보장
Q&A: 36 문항 JN0-694교육
업데이트: 2014-06-08
JN0-694시험자료: >>펼쳐보기
ITExamDump는 전문적인 IT인증시험덤프를 제공하는 사이트입니다.JN0-303인증시험을 패스하려면 아주 현병한 선택입니다. ITExamDump에서는JN0-303관련 자료도 제공함으로 여러분처럼 IT 인증시험에 관심이 많은 분들한테 아주 유용한 자료이자 학습가이드입니다. ITExamDump는 또 여러분이 원하도 필요로 하는 최신 최고버전의JN0-303문제와 답을 제공합니다.
ITExamDump의 Juniper인증 JN0-303시험덤프자료는 여러분의 시간,돈 ,정력을 아껴드립니다. 몇개월을 거쳐 시험준비공부를 해야만 패스가능한 시험을ITExamDump의 Juniper인증 JN0-303덤프는 며칠간에도 같은 시험패스 결과를 안겨드릴수 있습니다. Juniper인증 JN0-303시험을 통과하여 자격증을 취득하려면ITExamDump의 Juniper인증 JN0-303덤프로 시험준비공부를 하세요.
JN0-694 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-694.html
NO.1 You are implementing Q-in-Q tunneling on an EX Series switch. You want the tunnel to support
all C-VLANs; however, only some VLANs are able to send traffic across the tunnel.
Switch-1 has the following configuration:
[edit vlans]
user@Switch-1# show
v100 {
vlan-id 100;
interface {
ge-0/ 0/ 0.10;
ge-0/ 0/1.20;
}
dot1q-tunneling {
customer-vlans [ ];
}
}
What would solve this problem?
A. Add family ethernet-switching to the tunnel-side interface on Switch-1.
B. Implement RSTP .
C. Q-in-Q tunneling will not work in this scenario; use a Layer 2 VPN instead.
D. Remove the customer-vlans statement.
Answer: C
Juniper자격증 JN0-694 Dump JN0-694 Dumps JN0-694 dumps JN0-694덤프자료 JN0-694시험문제
NO.2 Two neighboring routers are able to form an OSPF adjacency, but are not able to establish an
IBGP neighborship.
What are two reasons for the IBGP neighborship problem? (Choose two.)
A. One of the devices has a misconfigured BGP peer address.
B. One or both of the connected interfaces are missing the family iso statement.
C. OSPF has a lower route preference than BGP .
D. A firewall filter on one of the interfaces is blocking TCP traffic.
Answer: B,C
Juniper덤프다운 JN0-694 dumps JN0-694기출문제 JN0-694 Dumps
NO.3 Your Junos device is dropping certain traffic flows, while allowing other traffic flows to pass
through the device unaffected.
Which CoS component is causing this problem?
A. BA classification
B. RED
C. MF classification
D. Rewrite rules
Answer: D
Juniper Dump JN0-694 IT자격증시험자료 JN0-694자격증덤프
NO.4 You are troubleshooting a problem where an OSPF adjacency between two neighboring
routers will not form.
What are two reasons for this problem? (Choose two.)
A. One or both of the connected interfaces are missing the family inet statement.
B. One or both of the connected interfaces are missing the family iso statement.
C. The connected interfaces are not on the same subnet.
D. Another IGP is running on one or both of the routers, overriding OSPF.
Answer: B,D
Juniper JN0-694시험 JN0-694 PDF JN0-694인증 JN0-694최신덤프
NO.5 You observe that a router is using an unusually high amount of CPU cycles.
You determine that continuous SPF calculations in OSPF are being performed.
What are two reasons for this problem? (Choose two.)
A. The wrong authentication keys between the OSPF neighbors are used.
B. The interface MTU is mismatched between the OSPF neighbors.
C. There are duplicate router IDs within the OSPF area.
D. An OSPF adjacency is flapping.
Answer: C,D
Juniper PDF JN0-694덤프 JN0-694시험 JN0-694기출문제
NO.6 Your switch is experiencing a problem where a port that should have only one host connected
occasionally shows that multiple MAC addresses are being learned.
Which configuration setting would ensure that no extra hosts can join the network using this switch
port?
A. mac-limit
B. no-mac-learning
C. persistent-learning
D. bpdu-block-on-edge
Answer: D
Juniper교육 JN0-694덤프다운 JN0-694국제공인자격증 JN0-694후기
NO.7 Your Layer 2 network uses VLAN IDs 100 through 400 and you are required to load-balance
these VLANs between two different root bridges. You are currently using the default RSTP settings
and notice that all VLANs are using the same root bridge.
How do you ensure the VLANs are load-balanced between two root bridges?
A. Configure MSTP with two MSTI regions and split the VLAN range between them.
B. Configure VSTP with two VLAN groups and split the VLAN range between them.
C. Configure two RSTP instances and split the VLAN range between them.
D. Configure STP and RSTP and split the VLAN range between them.
Answer: A
Juniper기출문제 JN0-694 JN0-694
NO.8 You are having problems redistributing RIP routes into OSPF. Your Junos device has the
following configuration:
[edit protocols ospf]
user@router# show
import my-policy;
area 0.0.0.0 {
interface ge-0/ 0/ 0.0;
interface ge-0/ 0/ ;
interface ge-0/ 0/ {
passive;
}
}
What would resolve the problem?
A. Apply my-policy as an export policy under the [edit protocols rip] hierarchy.
B. Apply my-policy as an import policy under the [edit protocols rip] hierarchy.
C. Apply my-policy as an export policy under the [edit protocols ospf] hierarchy.
D. Use the area-range parameter instead of a routing policy.
Answer: D
Juniper자격증신청 JN0-694 JN0-694시험자료 JN0-694
댓글 없음:
댓글 쓰기