IT업종 종사자분들은 모두 승진이나 연봉인상을 위해 자격증을 취득하려고 최선을 다하고 계실것입니다. 하지만 쉴틈없는 야근에 시달려서 공부할 시간이 없어 스트레스가 많이 쌓였을것입니다. ITExamDump의Avaya인증 7004.1덤프로Avaya인증 7004.1시험공부를 해보세요. 시험문제커버율이 높아 덤프에 있는 문제만 조금의 시간의 들여 공부하신다면 누구나 쉽게 시험패스가능합니다.
우리ITExamDump 에서는 여러분들한테 아주 편리하고 시간 절약함과 바꿀 수 있는 좋은 대책을 마련하였습니다. ITExamDump에서는Avaya 7004.1인증시험관련가이드로 효과적으로Avaya 7004.1시험을 패스하도록 도와드리겠습니다.만약 여러분이 다른 사이트에서도 관련덤프자료를 보셨을 경우 페이지 아래를 보시면 자료출처는 당연히 ITExamDump 일 것입니다. ITExamDump의 자료만의 제일 전면적이고 또 최신 업데이트일것입니다.
ITExamDump 의 Avaya인증 7004.1덤프는 PDF버전과 소프트웨어버전 두가지 버전으로 되어있는데 소프트웨어버전은 시뮬레이션버전입니다. 소프트웨어버전의 문제를 푸는 과정은 시험현장을 연상케하여 시험환경에 먼저 적응하여 실제시험에서 높은 점수를 받도록 도와드릴수 있습니다.
시험 번호/코드: 7004.1
시험 이름: Avaya (Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 66 문항
업데이트: 2014-04-20
IT업계에 종사하고 계시나요? 최근 유행하는Avaya인증 7004.1 IT인증시험에 도전해볼 생각은 없으신지요? IT 인증자격증 취득 의향이 있으시면 저희. ITExamDump의 Avaya인증 7004.1덤프로 시험을 준비하시면 100%시험통과 가능합니다. ITExamDump의 Avaya인증 7004.1덤프는 착한 가격에 고품질을 지닌 최고,최신의 버전입니다. ITExamDump덤프로 가볼가요?
7004.1 덤프무료샘플다운로드하기: http://www.itexamdump.com/7004.1.html
NO.1 A customer has a Communication Server 1000 RIs. 7 x system at their site. You have been asked to
add the Call Pickup feature to the ten IP telephones in the sales department. The customer wants to be
sure active calls are not lost when the change are made.
Which Phones Configuration feature can be enabled allowed you to ensure changes to the telephones
are not transmitted to the call server until the telephone is not busy?
A. Bulk change
B. Courtesy change
C. Group change
D. Template change
Answer: B
Avaya 7004.1 7004.1자료 7004.1
NO.2 Click the Exhibit button.
Given the customer Route List index shown in the exhibit, what is the first expensive route that a
call placed on that RLI could take?
A. Entry 0
B. Entry 1
C. Entry 2
D. Entry 3
Answer: C
Avaya기출문제 7004.1자료 7004.1
NO.3 A customer has deployed a Communication Server 1000 RIs. 7 x system at their site. Their sales
department is expanding and you have been asked to add Ave new telephones with the same capabilities
as the existing telephones in the department.
Which programming command should you use to complete this task.?
A. Move to DN
B. Move from TN
C. Copy from DN
D. Copy from TN
Answer: D
Avaya pdf 7004.1덤프 7004.1
NO.4 Click the Exhibit button.
A customer has asked if the Communication Server 1000 RIs. 7 x system can route anyone that dial an
unassigned number in the customer ¯ s D I D r ange t o t he A tt endan t.
In reviewing the current configuration as shown in the exhibit, what do you conclude?
(Choose two)
A. only internalstation users are routing to the Attendant
B. internal station users and non tie line users are routing to the Attendant
C. all caller types are receiving an overflow tone
D. NET_DATA Attendant and tie trunk users are receiving an overflow tone
Answer: B
Avaya 7004.1 7004.1
NO.5 Click the Exhibit button.
Given the customer ¯ s p r og r a mm ed da t abase sho w n i n t he exh i b it and AC 1 = 9 , ove r w h i ch R L I w ill a ca ll
placed to 9-1-912-534-2222 complete?
A. RLI 9
B. RLI 4
C. RLI 3
D. RLI 2
E. call will not complete as dialed
Answer: B
Avaya 7004.1자료 7004.1 7004.1
NO.6 For a situation where you use the CDP feature at a switch equipped with the MARS software package,
which statement are correct? (Choose two)
A. Use steering codes tor CDP calls that are the same as the assignedNARS Access Cades.
B. Use steering codes tor CDP calls that aredistinct from thoseassigned NARS Access Cades.
C. You can integrate CDP numbers with the NARS Uniform Dialing Plan (UDP).
D. Youcannot shareRoute Lists,Digit Manipulation tables and Time-of-Day schedule withNARS.
Answer: B,C
Avaya dump 7004.1인증 7004.1최신덤프
NO.7 Click the Exhibit button.
Given the SDRR programming options shown in the exhibit, which SDRR programming would allow a
user to dial 1-900-867-3333, but not successfully dial any other 1-900 based number?
A. Table 1
B. Table 2
C. Table 3
D. Table 4
Answer: A
Avaya덤프 7004.1 7004.1
NO.8 The Satellite Link Control feature ensures that the configuration of a call does not include more than one
communications satellite trunk. Tandem trunk calls, when connected through more than one
communication satellite trunk, are subject to transmission distortion due to propagation.
Which parameters are required to be equipped or configured for Satellite Link Control in the
Communication Server 1000?
A. Network Signaling (NSIG) package must be equipped.
Route must be configured with ESN3 signaling.
Route must be designated as a satellite route.
B. Route must be configured with STD or ETN signaling.
Route must be designated as a satellite route.
C. Network Transfer (NXFR) package must be equipped.
Route must be configured with ESN2 or ESN3 signaling
Route must be designated as a satellite route.
D. Network Signaling (NSIG) package must be equipped.
Route must be configured with ESN3 or ESN5 signaling.
Route must be programmed with a Traveling Class of Service (TCOS)
Answer: A
Avaya 7004.1기출문제 7004.1덤프
NO.9 Click the Exhibit button.
Consider a company ¯ s d i a li ng p l an sho w n i n t he exh i b it and an exa m p l e f o r it s r equ ir e m en t s :
A station user at the company, with Location Code 221, placed an ESN call, dialing 7-221-2581. This
would be an On-Net call and the NARS programming must remove the LOC code and dial the DN
internally.
What programming would remove the location code for a call dialed within the originating Communication
Server 1000 to a DN on that same Communication Server 1000?
A. Each site would have its own Location Code programmed as a Home Location Code(HLOC) under
Translation Table #1 in their CS 1000.
B. The location codes for each site would be programmed under the LOC programming in Translation
Table #2 at all locations.
C. Home NPA Codes (HNPA) for each site would be programmed under Translation Table #1 at each
location in their CS 1000.
D. Each site would have the Location Codesfor all sites programmed as Home Location Codes (HLOC) in
Translation Table #1 of their CS 1000.
Answer: A
Avaya덤프 7004.1 7004.1 7004.1 pdf
NO.10 An administrator is programming an NRS for the first time on a new Communication Server 1000
system RIS. 7.0 system. When attempting to add the Service Domain, it cannot be added as the Add
button is grayed out in the NRS.
Which tasked should you perform to resolve this issue?
A. reinstall the Signaling Server Software
B. reinstall the NRS software
C. switch from Standby database to Active database
D. switch from Active database to Standby database
Answer: D
Avaya 7004.1 7004.1
ITexamdump의 C_HANAIMP131덤프의 VCE테스트프로그램과 70-492덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 1Z0-060시험에 대비한 고품질 덤프와 1z0-465시험 최신버전덤프를 제공해드립니다. 최고품질 70-583시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기