HP인증 HP2-K01시험을 어떻게 공부하면 패스할수 있을지 고민중이시면 근심걱정 버리시고ITExamDump 의 HP인증 HP2-K01덤프로 가보세요. 문항수가 적고 적중율이 높은 세련된HP인증 HP2-K01시험준비 공부자료는ITExamDump제품이 최고입니다.
HP HP2-K01인증시험패스는 아주 어렵습니다. 자기에맞는 현명한 학습자료선택은 성공을 내딛는 첫발입니다. 퍼펙트한 자료만의 시험에 성공할수 있습니다. Pass4Tes시험문제와 답이야 말로 퍼펙트한 자료이죠. 우리HP HP2-K01인증시험자료는 100%보장을 드립니다. 또한 구매 후 일년무료 업데이트버전을 받을 수 있는 기회를 얻을 수 있습니다.
여러분이 어떤 업계에서 어떤 일을 하든지 모두 항상 업그레이되는 자신을 원할 것입니다.,it업계에서도 이러합니다.모두 자기자신의 업그레이는 물론 자기만의 공간이 있기를 바랍니다.전문적인 IT인사들은 모두 아시다싶이HP HP2-K01인증시험이 여러분의 이러한 요구를 만족시켜드립니다.그리고 우리 ITExamDump는 이러한 꿈을 이루어드립니다.
거침없이 발전해나가는 IT업계에서 자신만의 자리를 동요하지 않고 단단히 지킬려면HP인증 HP2-K01시험은 무조건 패스해야 합니다. 하지만HP인증 HP2-K01시험패스는 하늘에 별따기 만큼 어렵습니다. 시험이 영어로 출제되어 공부자료 마련도 좀 힘든편입니다. 여러분들의 고민을 덜어드리기 위해ITExamDump에서는HP인증 HP2-K01시험의 영어버전 실제문제를 연구하여 실제시험에 대비한 영어버전HP인증 HP2-K01덤프를 출시하였습니다.전문적인 시험대비자료이기에 다른 공부자료는 필요없이ITExamDump에서 제공해드리는HP인증 HP2-K01영어버전덤프만 공부하시면 자격증을 딸수 있습니다.
IT인증시험을 쉽게 취득하는 지름길은ITExamDump에 있습니다. ITExamDump의HP인증 HP2-K01덤프로 시험준비를 시작하면 성공에 가까워집니다. HP인증 HP2-K01덤프는 최신 시험문제 출제방향에 대비하여 제작된 예상문제와 기출문제의 모음자료입니다. HP인증 HP2-K01덤프는 시험을 통과한 IT업계종사자분들이 검증해주신 세련된 공부자료입니다. ITExamDump의HP인증 HP2-K01덤프를 공부하여 자격증을 땁시다.
IT업계에서 자신만의 위치를 찾으려면 자격증을 많이 취득하는것이 큰 도움이 될것입니다. HP 인증 HP2-K01시험은 아주 유용한 시험입니다. HP 인증HP2-K01시험출제경향을 퍼펙트하게 연구하여ITExamDump에서는HP 인증HP2-K01시험대비덤프를 출시하였습니다. ITExamDump에서 제공해드리는HP 인증HP2-K01시험덤프는 시장에서 판매하고 있는HP 인증HP2-K01덤프중 가장 최신버전덤프로서 덤프에 있는 문제만 공부하시면 시험통과가 쉬워집니다.
시험 번호/코드: HP2-K01
시험 이름: HP (Servicing HP BladeSystem)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 126 문항
업데이트: 2013-12-22
만약 아직도 우리를 선택할지에 대하여 망설이고 있다면. 우선은 우리 사이트에서 ITExamDump가 제공하는 무료인 일부 문제와 답을 다운하여 체험해보시고 결정을 내리시길 바랍니다.그러면 우리의 덤프에 믿음이;갈 것이고,우리 또한 우리의 문제와 답들은 무조건 100%통과 율로 아주 고득점으로HP인증HP2-K01험을 패스하실 수 있습니다,
HP2-K01 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP2-K01.html
NO.1 What is the maximum number of DIMMs that can be installed into an HP Integrity BL860c Server
Blade?
A. 6
B. 8
C. 10
D. 12
E. 16
Answer: D
HP HP2-K01 HP2-K01 HP2-K01 pdf HP2-K01시험문제
NO.2 What happens if a server blade is moved from an enclosure managed by Virtual Connect to an
enclosure that is not managed by Virtual Connect?
A. MAC address and WWNs must be changed manually for the server blade.
B. Local MAC addresses are automatically returned to the original factory defaults.
C. After boot, server blades will gain access to the network as soon as the server and interconnect
modules are ready.
D. The configuration of the server blade is automatically updated before it is allowed to power on
and connect to the network.
Answer: B
HP HP2-K01덤프 HP2-K01 HP2-K01인증
NO.3 Which management functionality is provided by the Onboard Administrator? (Select two.)
A. manages shared power and cooling for the enclosure
B. provides management Ethernet fabric for the enclosure
C. provides HP SIM (System Insight Manager) functionality for Blade servers
D. activates Remote Deployment Pack (RDP) when an in-service server fails
E. automates the process of deploying server operating systems and software
Answer: A,B
HP자료 HP2-K01 pdf HP2-K01시험문제 HP2-K01시험문제
NO.4 A customer wants to install five full-height blade servers into a c-Class enclosure that is running
N+N power supply redundancy mode.
How many power supplies are required to support this configuration?
A. 3
B. 4
C. 5
D. 6
Answer: D
HP HP2-K01인증 HP2-K01 dumps HP2-K01 dump HP2-K01
NO.5 If you suspect the hard drive or hard drive subsystem may be at fault in a system, which HP tools
can isolate the source of the problem? (Select two.)
A. Onboard Administrator
B. Array Diagnostics Utility (ADU)
C. ROM-Based Setup Utility (RBSU)
D. Insight Diagnostics Online Edition
E. Option ROM Configuration for Arrays (ORCA)
Answer: B,D
HP HP2-K01 HP2-K01 HP2-K01 HP2-K01인증 HP2-K01자료
NO.6 Some servers within a customer data center turn off because of overheating. You have an air
conditioning specification and want to compare this information with the amount of heat generated
by the servers.
Which HP tool provides this information?
A. Product Bulletin
B. Power Calculator
C. Data Center Sizer
D. Performance Quick Reference Tool (PQRT)
Answer: B
HP HP2-K01 pdf HP2-K01 pdf
NO.7 Which GUI utility diagnoses system bottlenecks and is easily integrated with HP Systems Insight
Manager?
A. HP Control Tower for HPBladeSystem
B. HPProLiant Essentials Workload Management Pack
C. HPProLiant Essentials Performance Management Pack
D. HPProLiant Essentials Vulnerability and Patch Management Pack
Answer: C
HP HP2-K01 HP2-K01덤프
NO.8 How many BL30p servers can be supported by a fully populated 1U p-Class power enclosure?
A. 4
B. 8
C. 12
D. 16
Answer: D
HP HP2-K01 HP2-K01시험문제 HP2-K01
NO.9 Which item is required to power on and troubleshoot a single p-Class blade server that has been
removed from its enclosure?
A. Diagnostic Station and adapter
B. Server Blade Management Module
C. Integrated Lights-Out remote console
D. You cannot power on and troubleshoot a p-Class blade that has been removed from its
enclosure
Answer: A
HP dumps HP2-K01 HP2-K01 HP2-K01 pdf
NO.10 You are installing a new InifiniBand Mezzanine card into a customer's BL480c server blade. The
mezzanine card is installed into mezzanine slot 2.
Which interconnect location must the InifiniBand controller be installed into?
A. bays 3-4
B. bays 5-6
C. bays 7-8
D. Placement of the controller does not matter. The Onboard Administrator will properly map
theInifiniband mezzanine card to the installed Infiniband Interconnect.
Answer: B
HP HP2-K01 dumps HP2-K01 HP2-K01 pdf
NO.11 Which HP remote application continuously monitors hardware and sends an alert to HP when an
error occurs?
A. HP Systems Insight Manager
B. Open Service Event Manager
C. Instant SupportEnterprise Edition
D. Integrated Management Log Viewer
Answer: C
HP dump HP2-K01 HP2-K01 HP2-K01자료 HP2-K01 dumps
NO.12 In which situation are qualified rack options covered by the HP BladeSystem c-Class Care Pack
services?
A. when the options are installed in the same rack
B. when the rack is fully populated with p-Class blades
C. when the options are used only with blade equipment
D. when the options are purchased with the c7000 enclosure
Answer: A
HP HP2-K01 HP2-K01 dumps
NO.13 Your customer requires software that will help keep HP software and drivers installed on c-Class
blade servers up-to-date. They want a low-cost solution.
What should you recommend to this customer? (Select two)
A. HP Client Manager
B. HP Virtualization Software
C. Version Control Agent (VCA)
D. Version Control Repository Manager (VCRM)
E. Vulnerability and Patch Management Pack (VPM)
Answer: C,D
HP인증 HP2-K01 HP2-K01자료 HP2-K01 HP2-K01시험문제
NO.14 You are performing maintenance at a customer's site and they are booting an HP BladeSystem p-
Class server from a storage area network (SAN). You must configure the server with a virtual boot
device that enables the server to fetch boot-loading instructions from the SAN.
How is the virtual boot device presented to the host server?
A. as a Logical Unit Number (LUN) on the disk array
B. as a Pre-boot Execution Environment (PXE) NIC
C. as aFibre channel Host Bus Adapter (HBA) on the target server
D. as a Deployment Server database attached to the target server
Answer: A
HP자격증 HP2-K01 HP2-K01 pdf HP2-K01덤프
NO.15 Which task of the HP Troubleshooting Methodology do you accomplish when performing Step 2?
A. Determine which subsystem could cause the problem.
B. Identify the steps necessary to implement each solution.
C. Identify the possible solution for each possible root cause.
D. Determine and use the most appropriate tools for each situation.
Answer: A
HP HP2-K01시험문제 HP2-K01 dumps HP2-K01
NO.16 Which c-Class BL series server blade supports 4 internal SAS drives?
A. BL460c
B. BL480c
C. BL685c
D. BL860c
Answer: B
HP HP2-K01 dumps HP2-K01자격증 HP2-K01인증
NO.17 Your customer has eight BL20p G3 servers all with Fibre Channel mezzanine cards. They also
have a GbE2 switch installed with a Brocade switch attached.
None of their servers can access external shared storage (MSA1500cs). What should you verify
first?
A. if the BL20p G3 has a 4Gb or fasterFibre Channel card
B. if the Brocade switch has an IP address assigned by DHCP
C. ifFibre Channel pass through is installed on the GbE2 switches
D. if Selective Storage Presentation (SSP) is enabled on the MSA1500cs
Answer: C
HP HP2-K01 HP2-K01자격증 HP2-K01 HP2-K01 dump HP2-K01
NO.18 You work with an enclosure equipped with ten fans and sixteen half-height servers. Two fans
failed.
In which slots must you insert the remaining fans to keep all sixteen servers working?
A. 1, 2, 3, 4, 6, 7, 8, 9
B. 2, 3, 4, 5, 7, 8, 9, 10
C. 1, 2, 4, 5, 6, 7, 9, 10
D. 1, 2, 3, 4, 7, 8, 9, 10
Answer: C
HP자격증 HP2-K01 HP2-K01 HP2-K01 HP2-K01 HP2-K01 dumps
NO.19 You need to update Integrated Lights-Outs (iLO) card firmware, but you do not have physical
access to the server.
How can you accomplish this task?
A. useiLO web interface
B. use System Software Manager
C. use Version Control Repository Manager (VCRM)
D. use Instant Support Enterprise Edition (ISEE) software
Answer: A
HP기출문제 HP2-K01기출문제 HP2-K01 pdf HP2-K01 pdf
NO.20 A customer reports that an InfiniBand switch does not power on. What is a possible cause of this
problem?
A. Dynamic Power Saver is not activated on theInfiniBand switch.
B. A three-phase power system should be used withInfiniBand switches.
C. At least one server blade is not equipped with Host Channel Adapter (HCA) card.
D. The Onboard Administrator version firmware does not supportInfiniBand switches.
Answer: D
HP HP2-K01 HP2-K01 dumps HP2-K01덤프 HP2-K01
NO.21 Which HP StorageWorks arrays can be used with the HP BladeSystem c-Class? (Select two.)
A. MSA 20
B. MSA 30
C. MSA 500
D. MSA 1000
E. MSA 1500cs
Answer: D,E
HP HP2-K01 HP2-K01자료 HP2-K01덤프 HP2-K01시험문제
NO.22 You added an interconnect switch in an HP BladeSystem c-Class and the switch does not power
up. What should you check? (Select three.)
A. interconnect type and location
B. position of the mezzanine cards
C. position of the power supplies in the enclosure
D. status of the first full-height server blade in the enclosure
E. enclosure and switch status in the Onboard Administrator
F. whether interconnect bay has been activated for the bay the switch is in
Answer: A,B,E
HP자격증 HP2-K01기출문제 HP2-K01덤프 HP2-K01자격증
NO.23 Which processor types are offered on the BL460c? (Select two)
A. AMDOpteron Processor
B. Dual-Core Intel EM64T processor
C. Intel Itanium 2 Madison processor
D. Intel Itanium 2 Montecito processor
E. Quad-Core Intel EM64T processor
Answer: B,E
HP dumps HP2-K01 HP2-K01
NO.24 Which HP cooling technology uses power management to control CPU power state automatically
based on application demand?
A. Active Cool fans
B. Dynamic Power Saver
C. Modular Cooling System
D. ProLiant Power Regulator
Answer: D
HP자료 HP2-K01시험문제 HP2-K01 HP2-K01최신덤프
NO.25 During which portion of the HP Troubleshooting Methodology do you carefully observe and record
the results of each step including any error messages or changes in functionality?
A. Step 1 - Collect data
B. Step 3 - Develop the action plan
C. Step 4 - Execute the action plan
D. Step 6 - Implement preventative measures
Answer: C
HP HP2-K01 HP2-K01 HP2-K01
NO.26 Which utility allows you to easily install and provision one or many blade servers in an unattended,
automated fashion?
A. Virtual Install Disk
B. Rapid Deployment Pack (RDP)
C. ROM-Based Setup Utility (RBSU)
D. HP Systems Insight Manager (HP SIM)
Answer: B
HP HP2-K01 pdf HP2-K01기출문제 HP2-K01 HP2-K01
NO.27 Which online tool can be utilized to plan the power requirements for an HP Integrity BL860c
Blade?
A. HP Part Surfer
B. HP Knowledge Base
C. HPBladeSystem Sizer
D. HP Power Analysis & Planner
Answer: C
HP HP2-K01덤프 HP2-K01덤프 HP2-K01 HP2-K01 pdf HP2-K01
NO.28 Which ProLiant Essentials Foundation Pack CD can run the Array Diagnostic Utility (ADU)?
A. Diagnostic CD
B. SmartStart CD
C. Management CD
D. Firmware Maintenance CD
Answer: B
HP HP2-K01자격증 HP2-K01 pdf HP2-K01
NO.29 Your customer wants a solution that allows them to remotely deploy operating systems without
having to interact directly with each server blade or hiring additional IT staff.
Which product should they install to accomplish this goal?
A. HP Version Control Agent
B. HP Rapid Deployment Pack
C. HP Remote Deployment Utility
D. HP Vulnerability and Patch Management
E. HP Version Control Repository Manager
Answer: B
HP HP2-K01 dumps HP2-K01기출문제 HP2-K01자격증 HP2-K01 HP2-K01 dumps
NO.30 You installed new server blades into an HP BladeSystem c-Class enclosure.
How does the enclosure indicate if a server blade is not installed correctly?
A. The HPBladeSystem Insight Display will flash blue.
B. The interconnect will display errors when you configure it.
C. The Onboard Administrator will not allow the interconnect to power on.
D. The Onboard Administrator will not allow the incorrectly placed server blade to power on.
Answer: D
HP HP2-K01인증 HP2-K01인증 HP2-K01 dump
ITexamdump의 C_TSCM52_64덤프의 VCE테스트프로그램과 C_TADM53_70덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 646-206시험에 대비한 고품질 덤프와 IIA-CCSA시험 최신버전덤프를 제공해드립니다. 최고품질 LOT-405시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기