Symantec ST0-10X 최신덤프

저희는 수많은 IT자격증시험에 도전해보려 하는 IT인사들께 편리를 가져다 드리기 위해 Symantec ST0-10X실제시험 출제유형에 근거하여 가장 퍼펙트한 시험공부가이드를 출시하였습니다. 많은 사이트에서 판매하고 있는 시험자료보다 출중한ITExamDump의 Symantec ST0-10X덤프는 실제시험의 거의 모든 문제를 적중하여 고득점으로 시험에서 한방에 패스하도록 해드립니다. Symantec ST0-10X시험은ITExamDump제품으로 간편하게 도전해보시면 후회없을 것입니다.

Symantec ST0-10X인증시험을 패스하려면 시험대비자료선택은 필수입니다. 우리ITExamDump에서는 빠른 시일 내에Symantec ST0-10X관련 자료를 제공할 수 있습니다. ITExamDump의 전문가들은 모두 경험도 많고, 그들이 연구자료는 실제시험의 문제와 답과 거이 일치합니다. ITExamDump 는 인증시험에 참가하는 분들한테 편리를 제공하는 사이트이며,여러분들이 시험패스에 도움을 줄 수 있는 사이트입니다.

ITExamDump는Symantec ST0-10X인증시험을 아주 쉽게 패스할 수 있도록 도와드리는 사이트입니다. ITExamDump의 엘리트한 전문가가 끈임 없는 노력으로 최고의Symantec ST0-10X자료를 만들었습니다. 이 자료로 여러분은 100%Symantec의ST0-10X인증시험을 패스할 수 있으며, ITExamDump을 선택함으로 성공을 선택한 것입니다. ITExamDump가 제공하는 시험가이드로 효과적인 학습으로 많은 분들이 모두 인증시험을 패스하였습니다. 이건 모두 ITExamDump 인증시험덤프로 공부하였기 때문입니다. 그 중Symantec ST0-10X인증시험을 패스한 분들도 모두 ITExamDump인증시험덤프를 사용하였기 때문입니다.

ITExamDump의 덤프선택으로Symantec ST0-10X인증시험에 응시한다는 것 즉 성공과 멀지 않았습니다. 여러분의 성공을 빕니다.

시험 번호/코드: ST0-10X

시험 이름: Symantec (Veritas Storage Foundation 5 for Unix (STS))

ITExamDump사이트에서 제공하는Symantec 인증ST0-10X 덤프의 일부 문제와 답을 체험해보세요. 우리 ITExamDump의 를Symantec 인증ST0-10X 덤프공부자료를 선택해주신다면 우리는 최선을 다하여 여러분이 꼭 한번에 시험을 패스할 수 있도록 도와드리겠습니다.만약 여러분이 우리의 인증시험 덤프를 보시고 시험이랑 틀려서 패스를 하지 못하였다면 우리는 무조건 덤프비용 전부를 환불해드릴것입니다. ITExamDump제품으로 자격증을 정복합시다!

인터넷에는Symantec인증 ST0-10X시험대비공부자료가 헤아릴수 없을 정도로 많습니다.이렇게 많은Symantec인증 ST0-10X공부자료중 대부분 분들께서 저희ITExamDump를 선택하는 이유는 덤프 업데이트가 다른 사이트보다 빠르다는 것이 제일 큰 이유가 아닐가 싶습니다. ITExamDump의 Symantec인증 ST0-10X덤프를 구매하시면 덤프가 업데이트되면 무료로 업데이트된 버전을 제공받을수 있습니다.

ST0-10X 덤프무료샘플다운로드하기: http://www.itexamdump.com/ST0-10X.html

NO.1 The 'Administer' button in the Storage Foundation Management Server user interface for a host is
continually red, and the vxsvc32 agent is listed as DOWN.
How do you solve this problem?
A.Reconfigure the Storage Foundation management Server.
B.Reinstall the agent.
C.Restart Storage Foundation Management Server.
D.Change the types.ini configuration file on the Central Management Server.
Answer: D

Symantec dump   ST0-10X   ST0-10X dumps

NO.2 You need to create a volume for the HR department. You need to mount a file system with a high
demand for I/O throughput. You are aware that spanning the volume across multiple disks will increase
the I/O performance. Which risk should you be aware of when spanning the volume across multiple
disks?
A.Write throughput degradation
B.Single disk failure causes volume failure
C.Requirement for disk redundancy
D.Poor I/O performance
Answer: B

Symantec인증   ST0-10X   ST0-10X

NO.3 You are working with the Storage Foundation Intelligent Storage Provisioning feature, to create a new
mirrored volume. To prevent system failure, you want to ensure that you are able to perform a recovery of
mirrored volumes in minimum response time.
What should you do?
A.Create a Dirty Region Log.
B.Create a Data Change Map log.
C.Create a RAID-5 log.
D.Create a Snap object log.
Answer: A

Symantec   ST0-10X   ST0-10X자격증   ST0-10X   ST0-10X자격증

NO.4 You are responsible for administering the Storage Foundation for Sybase server. You want to remove a
mounted volume. What should you do first to ensure you are able to remove the mounted volume?
A.Remove the snapshot from the associated volume.
B.Recursively remove all plexes and subdisks.
C.Disassociate the snapshot from the associated volume.
D.Unmount the file system.
Answer: B

Symantec dumps   ST0-10X인증   ST0-10X   ST0-10X

NO.5 Which physical storage device is the equivalent to a virtual volume?
A.A disk
B.A partition
C.A block
D.A directory
Answer: B

Symantec dumps   ST0-10X dumps   ST0-10X시험문제   ST0-10X   ST0-10X자격증   ST0-10X dump

NO.6 What is the minimum number of plexes required for true mirroring to provide redundancy of data?
A.One
B.Two
C.Three
D.Four
Answer: B

Symantec   ST0-10X   ST0-10X   ST0-10X시험문제   ST0-10X pdf

NO.7 The vxprint command output for volume vol07 indicates that it has three plexes. How will you
determine which plexes are used for data?
A.Note the lengths. Data plexes are all the same length.
B.Note the STATE field. Non-data plexes will be indicated by the value: LOG.
C.Note the STATE field. Data plexes will be indicated by the value: MIRROR.
D.Note the RECORD TYPE field. Data plexes are designated with PL.
Answer: B

Symantec pdf   ST0-10X pdf   ST0-10X   ST0-10X

NO.8 Which two restrictions does relayout place on the administration of a volume while it is in progress?
(Select two.)
A.During a relayout, you cannot create a sparse plex.
B.During a relayout, you cannot change the number of mirrors in a volume.
C.During a relayout, you cannot change the number of subdisks in a volume.
D.During a relayout, you cannot create a snapshot of a volume.
E.During a relayout, you cannot create a backup of a volume.
Answer: AD

Symantec   ST0-10X   ST0-10X   ST0-10X시험문제

NO.9 You are monitoring a file system on a Solaris operating system using Veritas Volume Manager when
the following kernel message appears: WARNING: msgcnt x: mesg 069: V-2-69: memory usage specified
by the vxfs:vxfs_ninode and vxfs:vx_bc_bufhwm parameters exceeds available memory; the system may
hang under heavy load. You need to resolve this error. What should you do?
A.Increase the value of one or both parameters to 100% of physical memory or to 100% of kernel virtual
memory
B.Remove either the physical memory parameter or the kernel virtual memory parameter.
C.Leave the parameters at current levels and disregard the system message because it is a false
message.
D.Reduce the value of one or both parameters to less than 50% of physical memory or to 66% of kernel
virtual memory
Answer: D

Symantec pdf   ST0-10X자료   ST0-10X시험문제   ST0-10X

NO.10 How many free partitions do you need to encapsulate a boot disk?
A.1
B.2
C.3
D.4
Answer: B

Symantec   ST0-10X   ST0-10X

NO.11 You have large number of mirrored volumes, and the resynchronization process on mirrored volumes
will take lot of time. You want to address enable Dirty Region Logging (DRL) and find out the cause why it
takes a long time for resynchronization. You want to check the status of DRL logging to see if it is already
enabled.
How will you accomplish this task?
A.Use the vxprint command with the -F%drllogging $DCOVOL option
B.Use the vxprint command with the -F%drllogging $DRLVOL option
C.Use the vxprint command with the -F%dcologging $DCOVOL option
D.Use the vxprint command with the -F%drllogging $$DCONAME option
Answer: D

Symantec   ST0-10X   ST0-10X인증   ST0-10X

NO.12 You are auditing a current storage environment that is not utilizing storage tiering. The information
gained from the audit is to be used in a new storage tiering design that will have 4 tiers (Tiers 1-4). You
need to determine the location for archive data which needs to be accessible but is not used heavily.
Where should you store this data?
A.Tier 1: High-end storage arrays with fast, reliable network connections.
B.Tier 2: High-end arrays, but performance is not a priority.
C.Tier 3: Mid-range to low-end storage arrays with fast, reliable network connections.
D.Tier 4: low-cost media, such as tape, with little consideration given to performance.
Answer: C

Symantec   ST0-10X기출문제   ST0-10X자료   ST0-10X   ST0-10X

NO.13 Which command will you use to determine the operating mode of vxconfigd?
A.vxdctl enable
B.vxdctl mode
C.vxmode
D.ps -ef |grep vxconfig
Answer: B

Symantec   ST0-10X   ST0-10X   ST0-10X시험문제

NO.14 What is the default limit to the number of subdisks that can be attached to a single plex?
A.1024
B.2048
C.4096
D.Unlimited
Answer: C

Symantec   ST0-10X   ST0-10X시험문제

NO.15 You place six physical disks under Volume Manager control to create 10GB of volume. You want to
use this volume as an archive directory. You need to create a volume that will store three copies of the
archived data. Which command will you use to create a volume with three plexes?
A.vxassist make archivevol 30g layout=stripe-mirror nmirror=3
B.vxassist make archivevol 30g layout=stripe-mirror ncolumn=3
C.vxassist make archivevol 10g layout=stripe-mirror nmirror=3
D.vxassist make archivevol 10g layout=stripe-mirror ncolumn=3
Answer: C

Symantec   ST0-10X pdf   ST0-10X자료   ST0-10X   ST0-10X시험문제

NO.16 You want to allow non-layered volume to change to layered stripe-mirror volume while remaining online.
What is the correct procedure to perform this conversion?
A.Convert the volume, stop the volume, remount the file system, and start the volume.
B.Unmount the file system, stop the volume, convert the volume, start the volume, and remount the file
system.
C.Resync the volume, convert the volume, and mirror the volume.
D.Stop the volume and then convert the volume.
Answer: C

Symantec pdf   ST0-10X기출문제   ST0-10X

NO.17 You have installed Storage Foundation 5.0 Standard server with a number of hosts. You want to
centrally monitor and manage the hosts. You also want to generate reports for the hosts and the storage
resources that the hosts consume. What should you do?
A.Install the Veritas Quick I/O option on Storage Foundation 5.0 server.
B.Install Veritas Storage Foundation Management Server on Storage Foundation 5.0 server.
C.Install Veritas Storage Foundation Management Host on Storage Foundation 5.0 server.
D.Upgrade Storage Foundation 5.0 Standard to Storage Foundation 5.0 Enterprise.
Answer: B

Symantec시험문제   ST0-10X시험문제   ST0-10X자료

NO.18 Which three are the database agents that are supported by Storage Foundation High Availability
version? (Select three.)
A.Informix
B.DB/2
C.Ingress
D.Oracle
E.Sybase
F.SQL
Answer: BDE

Symantec자격증   ST0-10X   ST0-10X덤프   ST0-10X

NO.19 Which structure records are stored in the private region? (Each correct Answer presents part of the
solution. Select three.)
A.Disk group configuration
B.Disk and disk group ID
C.File system metadata
D.Disk group kernel log
E.Partition tables
Answer: ABD

Symantec인증   ST0-10X덤프   ST0-10X기출문제   ST0-10X   ST0-10X

NO.20 Which form of Disk Spanning allows you to map data in equally-sized chunks alternating across
multiple disks and is also known as interleaving?
A.Striping
B.Concatenation
C.Mirroring
D.Parity
Answer: A

Symantec   ST0-10X dumps   ST0-10X   ST0-10X최신덤프   ST0-10X

ITExamDump의 Symantec 인증 ST0-10X시험덤프공부자료 출시 당시 저희는 이런 크나큰 인지도를 갖출수 있을지 생각도 못했었습니다. 저희를 믿어주시고 구매해주신 분께 너무나도 감사한 마음에 더욱 열심히 해나가자는 결심을 하였습니다. Symantec 인증 ST0-10X덤프자료는ITExamDump의 전문가들이 최선을 다하여 갈고닦은 예술품과도 같습니다.100% 시험에서 패스하도록 저희는 항상 힘쓰고 있습니다.