Cisco 640-802 시험문제

목표를 이루는 방법은 여러가지가 있는데 어느 방법을 선택하면 가장 빨리 목표를 이룰수 있을가요? Cisco인증 640-802시험을 패스하는 길에는ITExamDump의Cisco인증 640-802덤프를 공부하는 것이 가장 좋은 방법이라는것을 굳게 약속드립니다. ITExamDump의Cisco인증 640-802덤프는 시험문제에 초점을 두어 제작된 공부자료이기에Cisco인증 640-802패스를 가장 빠른 시일내에 한방에 할수 있도록 도와드립니다.

우리 ITExamDump에서는 여러분을 위하여 정확하고 우수한 서비스를 제공하였습니다. 여러분의 고민도 덜어드릴 수 있습니다. 빨리 성공하고 빨리Cisco 640-802인증시험을 패스하고 싶으시다면 우리 ITExamDump를 장바구니에 넣으시죠 . ITExamDump는 여러분의 아주 좋은 합습가이드가 될것입니다. ITExamDump로 여러분은 같고 싶은 인증서를 빠른시일내에 얻게될것입니다.

네트워크 전성기에 있는 지금 인터넷에서Cisco 인증640-802시험자료를 많이 검색할수 있습니다. 하지만 왜ITExamDump덤프자료만을 믿어야 할가요? ITExamDump덤프자료는 실제시험문제의 모든 유형에 근거하여 예상문제를 묶어둔 문제은행입니다.시험적중율이 거의 100%에 달하여Cisco 인증640-802시험을 한방에 통과하도록 도와드립니다.

시험 번호/코드: 640-802

시험 이름: Cisco (Cisco Certified Network Associate(CCNA))

많은 사이트에서 Cisco인증 640-802시험대비덤프를 제공해드리는데ITExamDump를 최강 추천합니다. ITExamDump의Cisco인증 640-802덤프에는 실제시험문제의 기출문제와 예상문제가 수록되어있어 그 품질 하나 끝내줍니다.적중율 좋고 가격저렴한 고품질 덤프는ITExamDump에 있습니다.

ITExamDump의 Cisco인증 640-802덤프를 공부하여Cisco인증 640-802시험을 패스하는건 아주 간단한 일입니다.저희 사이트에서 제작한Cisco인증 640-802덤프공부가이드는 실제시험의 모든 유형과 범위가 커버되어있어 높은 적중율을 자랑합니다.시험에서 불합격시 덤프비용은 환불신청 가능하기에 안심하고 시험준비하시면 됩니다.

ITExamDump에서 출시한 Cisco 인증 640-802시험덤프는ITExamDump의 엘리트한 IT전문가들이 IT인증실제시험문제를 연구하여 제작한 최신버전 덤프입니다. 덤프는 실제시험의 모든 범위를 커버하고 있어 시험통과율이 거의 100%에 달합니다. 제일 빠른 시간내에 덤프에 있는 문제만 잘 이해하고 기억하신다면 시험패스는 문제없습니다.

640-802 덤프무료샘플다운로드하기: http://www.itexamdump.com/640-802.html

NO.1 When you are logged into a switch, which prompt indicates that you are in privileged mode?
A. %
B. @
C. >
D. $
E. #
Answer: E

Cisco   640-802   640-802자격증   640-802

NO.2 Which command displays CPU utilization?
A. show protocols
B. show process
C. show system
D. show version
Answer: B

Cisco   640-802   640-802기출문제   640-802 dumps   640-802기출문제

NO.3 Which two addresses can be assigned to a host with a subnet mask of 255.255.254.0? (Choose two.)
A. 113.10.4.0
B. 186.54.3.0
C. 175.33.3.255
D. 26.35.2.255
E. 17.35.36.0
Answer: BD

Cisco   640-802   640-802   640-802덤프

NO.4 The network default gateway applying to a host by DHCP is 192.168.5.33/28. Which option is the valid
IP address of this host?
A. 192.168.5.55
B. 192.168.5.47
C. 192.168.5.40
D. 192.168.5.32
E. 192.168.5.14
Answer: C

Cisco인증   640-802 dumps   640-802   640-802인증   640-802

NO.5 Which layer in the OSI reference model is responsible for determining the availability of the receiving
program and checking to see if enough resources exist for that communication?
A. transport
B. network
C. presentation
D. session
E. application
Answer: E

Cisco기출문제   640-802시험문제   640-802 pdf

NO.6 Workstation A has been assigned an IP address of 192.0.2.24/28. Workstation B has been assigned an
IP address of 192.0.2.100/28. The two workstations are connected with a straight-through cable. Attempts
to ping between the hosts are unsuccessful. What two things can be done to allow communications
between the hosts? (Choose two.)
A. Replace the straight-through cable with a crossover cable.
B. Change the subnet mask of the hosts to /25.
C. Change the subnet mask of the hosts to /26.
D. Change the address of Workstation A to 192.0.2.15.
E. Change the address of Workstation B to 192.0.2.111.
Answer: AB

Cisco   640-802 dump   640-802 pdf

NO.7 Which command shows system hardware and software version information?
A. show configuration
B. show environment
C. show inventory
D. show platform
E. show version
Answer: E

Cisco   640-802자격증   640-802

NO.8 Which command would you configure globally on a Cisco router that would allow you to view directly
connected Cisco devices?
A. enable cdp
B. cdp enable
C. cdp run
D. run cdp
Answer: C

Cisco기출문제   640-802   640-802   640-802

NO.9 When troubleshooting a Frame Relay connection, what is the first step when performing a loopback
test?
A. Set the encapsulation of the interface to HDLC.
B. Place the CSU/DSU in local-loop mode.
C. Enable local-loop mode on the DCE Frame Relay router.
D. Verify that the encapsulation is set to Frame Relay.
Answer: A

Cisco   640-802자격증   640-802   640-802   640-802인증

NO.10 A company implements video conferencing over IP on their Ethernet LAN. The users notice that the
network slows down, and the video either stutters or fails completely. What is the most likely reason for
this?
A. minimum cell rate (MCR)
B. quality of service (QoS)
C. modulation
D. packet switching exchange (PSE)
E. reliable transport protocol (RTP)
Answer: B

Cisco   640-802 dumps   640-802 dump   640-802 pdf

NO.11 Which command is used to configure a default route?
A. ip route 172.16.1.0 255.255.255.0 0.0.0.0
B. ip route 172.16.1.0 255.255.255.0 172.16.2.1
C. ip route 0.0.0.0 255.255.255.0 172.16.2.1
D. ip route 0.0.0.0 0.0.0.0 172.16.2.1
Answer: D

Cisco   640-802덤프   640-802 dumps   640-802자격증   640-802   640-802

NO.12 The network administrator has asked you to check the status of the workstation's IP stack by pinging the
loopback address. Which address would you ping to perform this task?
A. 10.1.1.1
B. 127.0.0.1
C. 192.168.0.1
D. 239.1.1.1
Answer: B

Cisco   640-802   640-802인증   640-802 dump

NO.13 Which command is used to see the path taken by packets across an IP network?
A. show ip route
B. show route
C. traceroute
D. trace ip route
Answer: C

Cisco시험문제   640-802   640-802기출문제   640-802 dumps

NO.14 Refer to the exhibit.
Which WAN protocol is being used?
A. ATM
B. HDLC
C. Frame Relay
D. PPP
Answer: C

Cisco   640-802   640-802 pdf   640-802

NO.15 When configuring a serial interface on a router, what is the default encapsulation?
A. atm-dxi
B. frame-relay
C. hdlc
D. lapb
E. ppp
Answer: C

Cisco   640-802   640-802   640-802   640-802 dump

NO.16 A network administrator must configure 200 switch ports to accept traffic from only the currently
attached host devices. What would be the most efficient way to configure MAC-level security on all these
ports?
A. Visually verify the MAC addresses and then telnet to the switches to enter the switchport-port security
mac-address command.
B. Have end users e-mail their MAC addresses. Telnet to the switch to enter the switchport-port security
mac-address command.
C. Use the switchport port-security MAC address sticky command on all the switch ports that have end
devices connected to them.
D. Use show mac-address-table to determine the addresses that are associated with each port and then
enter the commands on each switch for MAC address port-security.
Answer: C

Cisco pdf   640-802   640-802

NO.17 What must be set correctly when configuring a serial interface so that higher-level protocols calculate
the
best route?
A. bandwidth
B. delay
C. load
D. reliability
Answer: A

Cisco   640-802   640-802자격증   640-802

NO.18 Which command would correctly configure a serial port on a router with the last usable host address in
the 192.216.32.32/29 subnet?
A. Router(config-if)# ip address 192.216.32.38 255.255.255.240
B. Router(config-if)# ip address 192.216.32.39 255.255.255.224
C. Router(config-if)# ip address 192.216.32.63 255.255.255.248
D. Router(config-if)# ip address 192.216.32.39 255.255.255.248
E. Router(config-if)# ip address 192.216.32.63 255.255.255.248
F. Router(config-if)# ip address 192.216.32.38 255.255.255.248
Answer: F

Cisco   640-802기출문제   640-802

NO.19 Cisco Catalyst switches CAT1 and CAT2 have a connection between them using ports FA0/13. An 802.
1Q trunk is configured between the two switches. On CAT1, VLAN 10 is chosen as native, but on CAT2
the native VLAN is not specified.What will happen in this scenario?
A. 802.1Q giants frames could saturate the link.
B. VLAN 10 on CAT1 and VLAN 1 on CAT2 will send untagged frames.
C. A native VLAN mismatch error message will appear.
D. VLAN 10 on CAT1 and VLAN 1 on CAT2 will send tagged frames.
Answer: C

Cisco   640-802 dumps   640-802시험문제

NO.20 Which command is used to debug a ping command?
A. debug icmp
B. debug ip icmp
C. debug tcp
D. debug packet
Answer: B

Cisco인증   640-802 dumps   640-802

NO.21 Your ISP has given you the address 223.5.14.6/29 to assign to your router's interface. They have also
given you the default gateway address of 223.5.14.7. After you have configured the address, the router is
unable to ping any remote devices. What is preventing the router from pinging remote devices?
A. The default gateway is not an address on this subnet.
B. The default gateway is the broadcast address for this subnet.
C. The IP address is the broadcast address for this subnet.
D. The IP address is an invalid class D multicast address.
Answer: B

Cisco dump   640-802자료   640-802   640-802   640-802

NO.22 If IP routing is enabled, which two commands set the gateway of last resort to the default gateway?
(Choose two.)
A. ip default-gateway 0.0.0.0
B. ip route 172.16.2.1 0.0.0.0 0.0.0.0
C. ip default-network 0.0.0.0
D. ip default-route 0.0.0.0 0.0.0.0 172.16.2.1
E. ip route 0.0.0.0 0.0.0.0 172.16.2.1
Answer: CE

Cisco   640-802최신덤프   640-802   640-802

NO.23 Which command is used to copy the configuration from RAM into NVRAM?
A. copy running-config startup-config
B. copy startup-config: running-config:
C. copy running config startup config
D. copy startup config running config
E. write terminal
Answer: A

Cisco   640-802최신덤프   640-802최신덤프

NO.24 Which command is used to load a configuration from a TFTP server and merge the configuration into
RAM?
A. copy running-config: TFTP:
B. copy TFTP: running-config
C. copy TFTP: startup-config
D. copy startup-config: TFTP:
Answer: B

Cisco   640-802기출문제   640-802   640-802

NO.25 Which three options are valid WAN connectivity methods? (Choose three.)
A. PPP
B. WAP
C. HDLC
D. MPLS
E. L2TPv3
F. ATM
Answer: ACF

Cisco dumps   640-802최신덤프   640-802시험문제   640-802

NO.26 Which protocols are found in the network layer of the OSI reference model and are responsible for
path determination and traffic switching?
A. LAN
B. routing
C. WAN
D. network
Answer: B

Cisco   640-802최신덤프   640-802 dump   640-802   640-802

NO.27 Which command reveals the last method used to powercycle a router?
A. show reload
B. show boot
C. show running-config
D. show version
Answer: D

Cisco   640-802   640-802인증   640-802   640-802

NO.28 What is the difference between a CSU/DSU and a modem?
A. A CSU/DSU converts analog signals from a router to a leased line; a modem converts analog signals
from a router to a leased line.
B. A CSU/DSU converts analog signals from a router to a phone line; a modem converts digital signals
from a router to a leased line.
C. A CSU/DSU converts digital signals from a router to a phone line; a modem converts analog signals
from a router to a phone line.
D. A CSU/DSU converts digital signals from a router to a leased line; a modem converts digital signals
from a router to a phone line.
Answer: D

Cisco   640-802자료   640-802인증   640-802

NO.29 Data transfer is slow between the source and destination. The quality of service requested by the
transport layer in the OSI reference model is not being maintained. To fix this issue, at which layer should
the troubleshooting process begin?
A. presentation
B. session
C. transport
D. network
E. physical
Answer: D

Cisco   640-802   640-802   640-802기출문제   640-802   640-802자격증

NO.30 A system administrator types the command to change the hostname of a router. Where on the Cisco
IFS is that change stored?
A. NVRAM
B. RAM
C. FLASH
D. ROM
E. PCMCIA
Answer: B

Cisco dump   640-802   640-802   640-802인증   640-802기출문제   640-802자료

ITExamDump에서는Cisco 인증640-802시험대비덤프를 발췌하여 제공해드립니다. Cisco 인증640-802시험대비덤프에는 시험문제의 모든 예상문제와 시험유형이 포함되어있어 시험준비자료로서 가장 좋은 선택입니다. ITExamDump에서 제공해드리는 전면적인Cisco 인증640-802시험대비덤프로Cisco 인증640-802시험준비공부를 해보세요. 통과율이 100%입니다.